Updating

A

ATPDK

Member
 Midtjylland
Hi,

I can't get the procedure started, when I try to update the firmwear at navi.
I Can hear the CD spinning around in the dvd-slot - then quiet, and notthing happens?!

What am I doing wrong?

I do this:
ju7u9yzu.jpg


And can go any further than number 4.....???


iPhone Tapatalk
 
Wish I could help ..
Don't have Sat Nav in my 3.0si
But I'm the one who took 3 hours to adjust the clock to Daylight Savings Time ..
So Ill defer nano electronics to the rest of them here.

Best of Luck ...
Bumpy
 
Bumpy said:
Wish I could help ..
Don't have Sat Nav in my 3.0si
But I'm the one who took 3 hours to adjust the clock to Daylight Savings Time ..
So Ill defer nano electronics to the rest of them here.

Best of Luck ...
Bumpy
Click to expand...

Thanks! I'm normally good at electronic - but this....


iPhone Tapatalk
 
Have you tried putting the key in 1st position/click with the driver door open

If that doesn't work then I would try 2nd position/click with the driver door open

If that also doesn't work I would give the firmware DVD a good clean
 
ranski said:
Have you tried putting the key in 1st position/click with the driver door open

If that doesn't work then I would try 2nd position/click with the driver door open

If that also doesn't work I would give the firmware DVD a good clean
Click to expand...

I have done it all..
Still nothing!
Not sure if it have to "go totally to sleep" (so it start up with splashscreen) between my tests?!


iPhone Tapatalk
 
If in doubt disconnect car battery for 15mins, reconnect, then repeat update steps

If still no cigar then I would say the firmware DVD is buggered
 
IIRC the f/w disc is supposed to be a CD and not a DVD. Position 1 is the first click when the nav screen pops up before the ignition light comes on.
 
ranski said:
If in doubt disconnect car battery for 15mins, reconnect, then repeat update steps

If still no cigar then I would say the firmware DVD is buggered
Click to expand...

I'll try the battery.
Do you know what's called ignition position 1?


iPhone Tapatalk
 
Stuart Truman said:
IIRC the f/w disc is supposed to be a CD and not a DVD. Position 1 is the first click when the nav screen pops up before the ignition light comes on.
Click to expand...

It is a normal CD. Thanks:)


iPhone Tapatalk
 
I've downloaded an ISO image for the f/w. I think the one sent with the map disc was v32.2 which I don't want. If it woks I'll mail you the CD or the link if you can burn your own CDs
 
Stuart Truman said:
I've downloaded an ISO image for the f/w. I think the one sent with the map disc was v32.2 which I don't want. If it woks I'll mail you the CD or the link if you can burn your own CDs
Click to expand...

The one I've triede with is purchased from UK.. But i belive I have to try with this one today:
http://www.z4-forum.com/forum/viewtopic.php?t=44272
(The last post)


iPhone Tapatalk
 
Check whether it's v32 (official) or v32.2 (hacked) before you start. Personally there is no way I'd put hacked f/w on my car
 
Stuart Truman said:
Check whether it's v32 (official) or v32.2 (hacked) before you start. Personally there is no way I'd put hacked f/w on my car
Click to expand...

Me to - just want v32!
But how to check? Can I see a difference after downloading?


iPhone Tapatalk
 
OK. Just done mine. 5 mins from start to finish. I have a good standard v32 ISO image and as I no longer need the CD, happy to post it to anyone having a problem. Just post it onto the next person that needs it. Pay it forward and all that.

One question that's not meant to be insulting; You are creating a CD with Nero or Magic ISO etc and not just copying the ISO file to a CD are you?

To check if you have v32, go to the main screen on the nav system, select "SET" and look on the top right of the screen. You'll see 4-1/00 if you have v32.

THIS link has a lot of info on the different versions.
 
Stuart Truman said:
OK. Just done mine. 5 mins from start to finish. I have a good standard v32 ISO image and as I no longer need the CD, happy to post it to anyone having a problem. Just post it onto the next person that needs it. Pay it forward and all that.

One question that's not meant to be insulting; You are creating a CD with Nero or Magic ISO etc and not just copying the ISO file to a CD are you?

To check if you have v32, go to the main screen on the nav system, select "SET" and look on the top right of the screen. You'll see 4-1/00 if you have v32.

THIS link has a lot of info on the different versions.
Click to expand...

Glad to hear!
I have downloaded the v32 from link above now. And the UltraISO-program. But how many of these steps do I need to do, just to burn it (I don't want to costimize by the first attempt):
Can I jump directly to step seven? Or is six nessesery? (Don't know what meant by replace the folder V_2 - I have not changed anything in the ISO)
 
You must log in or register to reply here.
Back
Top Bottom