Scooba_Steve said:
Just because it manages doesn't mean it's a good idea.
Max torque is between 2500 and 4250 rpm. So all other things being equal you will have a wider throttle opening at 1300 rpm than 2500 for the same speed. This will be greater still when going uphill.
It's also somewhat pointless being in 6th at 30 as you have reduced acceleration potential.
All else is not equal. Max torque requires more fuel than the
required torque to propel you along at 30mph.
1,300rpm is plenty to provide enough torque to do 30mph on a flat. It'll be making well over 100lb/ft and probably at least 40-50bhp plus it idles just fine at 6-700rpm. If you drive the same piece of road at 30mph and reset the mpg trip computer at the same point each time then doing it in 6th compared to 4th I bet you will use less fuel. I'm well aware of feeling when the engine is labouring and I will drop down before that happens. I don't need more acceleration potential when I'm just following someone else. I would say it's pointless making more power than you need to and reduced acceleration potential is only pointless when you want acceleration.
With a smaller engine you do need more of its potential more of the time to maintain a speed but when you have an engine that is capable of producing much more power than is needed to maintain normal speeds why bother burning more fuel than you need to? Saves more for when you do want to accelerate...
To answer the original question I get around 31-32mpg on a 26 mile commute to work each way which is a mix of about a third A-Roads with overtakes, third motorway at 80mph and third city driving/traffic.