My Z4's evolution (Cruise Control)

Thank you! :-)
Apologies for not washing it before posting images.


Sent from my iPhone using Tapatalk
 
:thumbsup:

Look forward to seeing it with the exhaust in place.

I had my car with the rear bumper and a one sided exhaust for one day... And i know what you mean about it looking wierd.. However the wife (gf at the time) didnt notice it was different or that one side missed the exhaust (prob as it black and less noticable!


Sent from my iPhone 5 using Tapatalk
 
Quad exhaust DONE :thumbsup: (finally)
Awesome job done by EMP Performance in StAlbans today, sounds amazing, like a different engine compared to the previous custom box i had installed.

null_zps8dd894cc.jpg

94d90a0a-121f-4b88-ab8a-9dab904b3a87_zpsbe69593e.jpg

null_zps648922e5.jpg

null_zpsa9d9d31e.jpg
 
Interesting setup... With the twin box :thumbsup:

Although... You may want to put the screw back on the center holder of your heat-shield as it will start to rattle / come loose otherwise :thumbsup:


Sent from my iPhone 5 using Tapatalk
 
aquazi said:
You may want to put the screw back on the center holder of your heat-shield as it will start to rattle / come loose otherwise :thumbsup:
Click to expand...

Ahhhh that was prob me, thanks for spotting, off to do it now :thumbsup:
 
What did you do with the stuff that was in the way of the drivers side box?
Looks mint! Hope mine looks similar...

Oh and btw, git for beating me to it! :poke:
 
That looks brilliant!!!! Great job! Must sound super loud... Video needed! :poke:
Is it straight through or small boxes on each side?
 
Sounds AWESOME!
My previous back box sounded like the type a Chav would fit to his 1.3 Saxo. It had to go.
This tho sounds deep & low but not particularly loud at idle. At mid range revs it sound growly almost like that (but not quite) that of a 3.2 M straight 6.
My previous back box was just LOUD at all revs, but this is more progressive and has different characteristics for different revs in different gears (if that makes sense).
At the same time it feels loads more responsive, but I think my previous box lacked any back pressure and was effecting performance, where as this free's some back pressure up but with a positive effect on performance.
Cost was £495 including VAT with a lifetime warranty.
:-)



Sent from my iPhone using Tapatalk
 
Very nice... It is a twin back box? (Looks like it) which is very different to T pipe approach most of us quads have taken.


Sent from my iPhone 5 using Tapatalk
 
All in! Left it with them at 8am,
Me n the wife went off to be tourists for the day in StAlbans, 1pm get a call "job done!" :-)
I had heard very good thing about them, now I can safely recommend them myself.

:-)


Sent from my iPhone using Tapatalk
 
ESP, That's a good price! Would you mind putting some more pictures up of the exhaust for those that are interested in getting a similar thing done? People will be particularly in what's going on around the drivers side exit. Thanks!
 
Or add it to the 'quad conversion project' thread where it gives a one stop thread for all options and feedback

PS The conversion looks great

http://www.z4-forum.com/forum/viewtopic.php?f=2&t=28955
 
stlymch said:
ESP, That's a good price! Would you mind putting some more pictures up of the exhaust for those that are interested in getting a similar thing done? People will be particularly in what's going on around the drivers side exit. Thanks!
Click to expand...

Yep will do this weekend and will 'try' and get a video clip for sound
 
You must log in or register to reply here.
Back
Top Bottom