Z4_35i said:I don't have my original ESS flash update instructions to hand, but I found the details on another forum written up by ESS and they specifically state to make sure no bluetooth devices are connected when you do the flash update, just in case you need any supporting details for your discussion with the guy who attempted your E89 remap.
http://www.m3post.com/forums/showthread.php?t=769500
pvr said:... but get it fixed first as otherwise they might just hand it back and walk away.
stuartinzg said:Few more options yet. Ask them to return and reinstall the DME. Then contact wedge in the USA. He offers mapping services via MHD (an app in your phone) or JB4. He can walk you through a recovery process. It is also possible to recover a DME not communicating at all according to a forum member.
[email protected] his name is Ken
"Had this happen to me before. You will need someone with icom to help. Try contacting alex@alpine as he is the one who helped me. My problem was that my computer crashed midway through the flash. Couldn't iD edu or anything. He brought it back to life. He overnighted the icom, remote connected and was able to take care of it. Total down time was only like 2 days"
This guy can be found here:http://www.alpinemss.com/default.asp?m=0
Can't hurt to see of they recover first
Good luck
stuartinzg said:Few more options yet. Ask them to return and reinstall the DME. Then contact wedge in the USA. He offers mapping services via MHD (an app in your phone) or JB4. He can walk you through a recovery process. It is also possible to recover a DME not communicating at all according to a forum member.
[email protected] his name is Ken
"Had this happen to me before. You will need someone with icom to help. Try contacting alex@alpine as he is the one who helped me. My problem was that my computer crashed midway through the flash. Couldn't iD edu or anything. He brought it back to life. He overnighted the icom, remote connected and was able to take care of it. Total down time was only like 2 days"
This guy can be found here:http://www.alpinemss.com/default.asp?m=0
Can't hurt to see of they recover first
Good luck
Maniac said:I suspect the battery voltage thing may have played a part. I noted today when he attached the booster to the car that the voltage display didn't come on when he turned it on.. Making me wonder if it was working at all. Anyhow, done now so just want to get her back on the road.
As lovely as the Merc is, I miss the wrap around feeling and torque.