Clear light and Angel Eye Conversion - The Project and Story

LukeMace said:
What was your initial thought? Clear or Smoked?
Click to expand...

I initially wanted clear, but not with the £200 price tag for clear hockey's. and looking at Marius', I'd decided on smoked. I have a set of silver and black inners so I guess I can do both and 2 sets of hockey sticks too...
 
Marius' look great with the black inners and smoked :thumbsup: if your worried about how expensive the clear hockeys are Drop Marius a PM about some clear hockey sticks... Cheaper than OEM!
 
BALLS!!!
Early start for me tomorrow to re open and sort it out!!

vuzamypa.jpg
By the looks of it I'd forgot to put silicone to seal :headbang: dab glued then siliconed the rest... :oops:
Lesson learnt!
 
Don't forget to clean the inside Luke ;)
Seriously though, you will find it dead easy to open the headlights now you've done it once. And if Marius' "curse of the LED Angel Eyes" comes true, we'll all be replacing with CCFL rings soon anyways :D
 
LukeMace said:
BALLS!!!
Early start for me tomorrow to re open and sort it out!!

vuzamypa.jpg
By the looks of it I'd forgot to put silicone to seal :headbang: dab glued then siliconed the rest... :oops:
Lesson learnt!
Click to expand...

Bloody cow boy!!! :rofl:

Gutted mate :headbang:
 
markeg said:
Don't forget to clean the inside Luke ;)
Seriously though, you will find it dead easy to open the headlights now you've done it once. And if Marius' "curse of the LED Angel Eyes" comes true, we'll all be replacing with CCFL rings soon anyways :D
Click to expand...

Haha! I think even Marius was impressed with how bright they were! Think this is just me being dopey as opposed to the 'LED curse'! Hope so anyways!!

Yea it shouldn't be too bad to do, Considering how long it took to open them initially! I am aiming to have the whole job done from start to finish in 60 - 90 mins! :thumbsup:
 
ranski said:
bugger! although it did happen to me on my first set :thumbsdown:
Click to expand...

I'm not the only one then!! :lol: feel better already! Thanks Rich!


Machine monkey said:
LukeMace said:
BALLS!!!
Early start for me tomorrow to re open and sort it out!!

vuzamypa.jpg
By the looks of it I'd forgot to put silicone to seal :headbang: dab glued then siliconed the rest... :oops:
Lesson learnt!
Click to expand...

Bloody cow boy!!! :rofl:

Gutted mate :headbang:
Click to expand...

Shut ya monkey trap!! :lol:
 
Hi guys I need a bit of advice -


I have finished my latest set of clear / angel headlights so currently going about swapping over the HID kit

On my current set the dipped beam wires are yellow and brown, which then connect to the HID red and black (as shown in the first image)

However my new set of headlight wires are brown and black for the dipped beam, so I am somewhat unsure on which connects to the red and black on the HID

Old headlight (dipped bream)
yne5ezan.jpg

New headlight (dipped beam)
qe7umuga.jpg


Sent from my iPhone using Tapatalk
 
I'd of thought red to brown on the new set up, but then confused why it would be on the different side of the unit too?!
 
Also would have thought red <=> brown. Have you got a multimeter (or access to one) to check?
 
Attacked it again this morning... I HATE GETTING OFF SILICONE!!!!!

047EF091-31D6-4959-AD55-181D17B7652E-6694-00000756DA209C33_zpsa7312d1e.jpg


These are going nowhere!!
9388A5FD-85C4-4879-9170-D0A5F2952F0A-6694-00000756DFB032A3_zps0de01bee.jpg
 
:lol: good job there.

Removing the silicone is so much easier than cutting through them. How long did it take you?
 
You must log in or register to reply here.
Back
Top Bottom