Haha yep - thats the other way to do it. Mute used to be an option but not since they adeed the stupid floating symbol on screens while it is..
ekimj10 said:On the sound bar itself, we've not been totally impressed with the overall sound levels, generally its around 75/80% of the max. volumne.
Either you must all be deaf or you have it in a 50feet by 50feet room.
We watched a film again last night and our sound bar which turns up to a number of 50 was only on 12 so only on just over 20% of it's capabilty.
The sub turns up to 12 and we watch things with it set on either 9 or 10 which gives plenty of background bass.
We also have the sounds set on clear audio + for some films and movie for others.
ekimj10 said:Either you must all be deaf or you have it in a 50feet by 50feet room.
We watched a film again last night and our sound bar which turns up to a number of 50 was only on 12 so only on just over 20% of it's capabilty.
The sub turns up to 12 and we watch things with it set on either 9 or 10 which gives plenty of background bass.
We also have the sounds set on clear audio + for some films and movie for others.
Thanks for that, there could be an element of 70+ deafness but not that bad. Have tried locating the soundbar in various positions within the length of the optical cable, so limited and placed in front of the TV appears best.
A number of websites on this issue say that an HDI cable is preferable to the optical cable, the supplier/installer (JL) are saying the opposite. We'll see what an independent 'expert' has to say later in the week.
Stark said:Samsung every time...
Also have a play with your DSP settings as these can make a big difference to your volume levels. I tend to leave mine on MCH stereo for example however if I switch to dolby, the decibel level reduces at least 2-3 times.
bluestreak56 said:![]()
On my system I find the sub-woofer makes a big difference not only to bass but also to speech but then again mine is a 7.1 "virtual" system so its that surprising something extra comes through it.
I do think the DSP setting will make a difference though, glad your controls are all sorted now![]()