Z4 M LEATHER SEATS FOR SALE NOW SOLD

[dellboy]

I am in the process of removing a set of leather nappa black M seats with 3 memory electrics and heated. They are out of a post face lift but will also fit a pre face lift (that is what I have). Both seats are in perfect condition and have all sensors etc althought there is a little wear on the drivers side bolster were you would get out but really not noticeable. I am selling them as I am sick listening to the wife grumble about getting in and out of the car (lets just say that she likes a wider seat with no sides on it if you get my meaning) £675 plus postage or collection.
Thanks for looking
Ps I cannot get photos to load on this but if you are interested if you give me your e-mail address I can send them the old easy way

 

[PawnSacrifice]

dellboy, you've got to be joking, you've only just go the damn things in!

Can you get an orthopedic seat cover for when she's in the car? Lift her up a bit where the bolsters are wider.

 

[chrismann85]

would go for these myself but really broke after christmas

Plus I really want red or cream ones :evil:

 

[left98204]

Dibbs on those

Dellboy, you have a pm and email

Edit that, PMs don't seem to be working for you :headbang:

I sent you an email via your profile.

Send me some photos and I will happily take them off your hands

Cheers

 

[peddy]

left98204, from your signiture picture it looks like you already have black M seats? :?

EDIT: Are you after heated seats?

 

[left98204]

left98204, from your signiture picture it looks like you already have black M seats? :?

EDIT: Are you after heated seats?

Peddy, just sent you a PM.

Yeh, my seats are non-heated.

Wiring loom should all be in place, if not, just a few calls to Joe at Sopers for the bits I need.

 

[PawnSacrifice]

left98204, good thinking, this could work well for you! I may have a heated switch panel going - didn't bother adding heating to mine..

You will need to sort out the passenger seat occupancy sensor - different on facelift cars... I've done a post on swapping them over. Other options - small bypass box off of eBay or get it programmed out with Autologic (I think that's what they're called, you know the one).

 

[left98204]

left98204, good thinking, this could work well for you! I may have a heated switch panel going - didn't bother adding heating to mine..

You will need to sort out the passenger seat occupancy sensor - different on facelift cars... I've done a post on swapping them over. Other options - small bypass box off of eBay or get it programmed out with Autologic (I think that's what they're called, you know the one).

Definately interested in the switch panel if this purchase goes ahead. Also your knowledge on the sensor

Why didn't you add heating to yours if you have the panel?

 

[dellboy]

Pawnsacrifice has kindly said he would put the photo's on the thread for me so hopefully there should be 2 photos soon. One photo seat is out of the car and the other is in the car.
Some day I will learn how to use these computers and post my own photos, and before you tell me how someone tried to explain to me how but it is not my thing (or as most people say "he is a keyboard d--k)"

 

[dellboy]

Hopefully this works they look different colours on the photos but they are both black (i assume it is the flash)

 

[dellboy]

Thanks Matt
You must have done that in seconds

 

[PawnSacrifice]

Thanks Matt
You must have done that in seconds

No worries, consultancy fee for when I did mine Thought it best if I sent you the tags so you could see how it works (although uploading to PhotoBucket is a challenge for another day :wink: )

They're good seats, I tried to buy them a couple of times and just missed bidding this time, I think. Shame seats are so bloody hard to photograph, with making them look readlly baggy.

left98204, short answer... I originally bought a cheap set of M Seat heating pads, but they were just for the bolsters At this time I had the switch.
The whole story... I then looked at using the OE switch to control aftermarket pads. The power should connect okay, and if I'm right that the temperature settings are controlled by the amount of power sent to them (easy to check), that side of it should work. But, in addition to the two power cables, there is a third off of the switch, a temperature sensor, which is on the pad, but not sure if they would speak the same language. Part of me really wants to give it ago... but only really becasuse it's not been done before (OE switch / aftermarket pads), as far as I'm aware. Still tempted.

 

[dellboy]

Hi again, quite a few people have pm'd me and I am having trouble replying as they just seem to sit in my outbox.
If you want to speak to me ring me on 02890812362 evenings or 07768296572 days or e-mail [email protected]

Thanks
Ray

 

[dellboy]

provisionally sold until cheque clears
Thanks everyone