Toyota Supra V8 build

Looking very nice Matt. Can you reveal the colour? Any 2 colour themes going on with decals etc or just one colour?
 
Thanks Sars form an engineer that means a lot :thumbsup:

Each bank will be getting a little t28 running about a bar of boost. Our numbers and other peoples logic = around 500bhp and mountains of torque. The turbo set up is especially interesting for me. As we have the same thing planed for my z4 hopefully with similar results.
 
How have I missed this.

Awesome Matt.

You boys should be very proud. Living the dream in my eyes
 
Thanks buddy.

Its been wicked fun. I am hopping to find myself with funds in 2017 to do similar to my car. Although its nice working on this as i dont get the bills!!
 
If your really interested and have lots of time on your hands? Hear is the blog Chris has been writing about his car build.

https://mrbizzle.wordpress.com/2015/10/11/sneige-factory-jza80-toyota-supra-build/
https://mrbizzle.wordpress.com/2015/10/12/sneige-factory-jza80-supra-build-pt2-the-plot-thickens/?preview=true&preview_id=447&preview_nonce=0426aa7b88
https://mrbizzle.wordpress.com/?p=492&preview=true&preview_id=492
https://mrbizzle.wordpress.com/2015/10/13/sneige-factory-jza80-supra-build-pt4-spaghetti/
https://mrbizzle.wordpress.com/2015/10/16/sneige-factory-jza80-supra-build-pt5-aragosta/
https://mrbizzle.wordpress.com/2015/10/20/sneige-factory-jza80-supra-build-pt6-do-you-know-lex/
https://mrbizzle.wordpress.com/2015/10/22/sneige-factory-jza80-supra-build-pt-7-the-aftermath/
https://mrbizzle.wordpress.com/2015/10/27/snieige-factory-jza80-supra-build-pt8-choices-choices/
https://mrbizzle.wordpress.com/2015/11/04/sneige-factory-jza80-supra-build-pt-9-fing-fuel-line/
https://mrbizzle.wordpress.com/2015/11/09/sneige-factory-jza80-supra-build-pt-10-messy-goes-to-bizzlededo/
https://mrbizzle.wordpress.com/2015/11/16/sneige-factory-jza80-supra-build-part-11-the-plurality-of-the-internet/
https://mrbizzle.wordpress.com/2015/11/18/sneige-factory-jza80-supra-build-part-12-much-excitement/
https://mrbizzle.wordpress.com/2015/11/24/sneige-factory-jza80-supra-build-part-13-the-extremes-of-car-projects/
https://mrbizzle.wordpress.com/2015/12/07/sneige-factory-jza80-supra-build-part-14-boba-boobies-boxes/
 
So hear you are forum friends the car in its final clothes. Still much work to be done!! But we have a little time this weekend so hopfully a nice update on Monday as well. Pictures as i know you all like them :thumbsup:





These pictures are of the car after its been baking a little while in the booth. It will get many many hours more wet sanding and polishing. We estimate its taken about 100 hours in body work alone to get to this point. And probably a similar amount of time todate on mechanical work.

I would think i have spent 50 hours making bits n bobs and there is probably another 100 + hours until its finished. So dont start a build like this unless you have the following
. no social life
.lots of time
.deep deep pockets

Been a hole heap of fun though :thumbsup:
 
Liking the colour, bet you can't wait for it to be finished
 
I am looking forward to that day yes!! It has to be ready by the 28th of February its booked in to run drift taxis at Santa pod.

The trouble is its making me want to build something of my own.... I just cant finance what i would like to do at the moment.
 
I'm really enjoying this thread, car is starting to come alive with that colour coat - will look a lot better once you've filled those wheel arches with wider rubber :thumbsup:
 
Thanks Marlon yeah the wheels look a bit sad in the arches dont they!! Wheels are another problem for Chris at the moment!! Still nice problem to have.
 
So i had a bit of a lazy weekend. Only popped over the workshop for an hour or so. Chris had been busy wet sanding. But when i turned up we decided to test fit the engine and check the modified engine mounts. good news they now tit and locate perfectly. And i can machine them down another 20mm or so. So the engine will fit even lower when finished.







I think we will still have to put a bulge in the bonnet. As the plenum will be to high. Whats really good news and you can see in the pictures. the engine sits on and behind the front cross member.
 
Thanks Gregg our deadline of the 28th of February is looking less n less likely!!

We where hoping to buy an adapter plate for the gearbox-engine. But it looks like we have to cut a shut a toyota bell housing to a BMW gearbox now. Witch will be twitchy bum time for me calculating where to cut them both. And then cutting and welding them back together...
 
never ventured to this section of the forum before and im glad i found this thread!!! LOVE Supras, that and R34 are my fav cars ever!!!

if you were closer i would happily come round and be tea boy just to watch the car being worked on, i bet you love being part of it and once finished it will be a nice achievement for you to sit backl and admire!! :D

great work the both of you!
 
Thanks buddy

Yeah its great fun. Its getting a little more stressful now what with dead lines. And cutting and welding and frakinstining expressive parts together.
 
The write up has been an excellent read.The fabrication work you have done looks top notch . :thumbsup:
Had you heard the engine running prior to removing it from the donor car ,if not it will be squeaky bum time when it comes to startup time.
 
You must log in or register to reply here.
Back
Top Bottom