Torque Settings

[Zonder]

Is there a site for finding torque settings for fitting various parts?

Specifically at the moment I need the O2 sensor ones but I am bound to need to know others in the future.

 

[cj10jeeper]

I would buy a copy of the BMW TIS manual.
Search eBay and you'll find them
That will give you every procedure, torque and photos

 

[BrianD]

Also check online BMW workshop manual which might assist you, as there is a section titled tightening torques http://workshop-manuals.com/bmw/

 

[PerryGunn]

Useful general information document containing torque settings for BMWs

http://tedserbinski.com/files/bmw_torq.pdf

 

[Zonder]

Thanks for that just for other peoples reference if they find this. Oxygen sensor and oxygen monitor sensor sensors are 55Nm (search for 1AZ in the bmw_torq.pdf)

 

[GuidoK]

Thanks for that just for other peoples reference if they find this. Oxygen sensor and oxygen monitor sensor sensors are 55Nm (search for 1AZ in the bmw_torq.pdf)

50Nm according to TIS.
But that is with a lambda socket with arm style. With a straigt style socket it would be a little bit higher.

 

[Scooba_Steve]

TIS is really the reference you need to use, having put your VIN in.

 

[cj10jeeper]

TIS is really the reference you need to use, having put your VIN in.

Totally agree hence my reference to getting a copy of that. Everything else is good guesses or not exact model and spec. specific

 

[Zonder]

Ok I 'll grab a copy of tis then before I do anything don't want to damage anything.