Sound generator for N52

Zedebee

Lifer
North Hampshire
Anybody got a sound generator for my N52 which doesn’t have one? Eerily, it’s the quietest Z4 I’ve ever driven.
 
I bought my E86 with it missing the pipe/grommet from the sound generator to the bulkhead. I waited a while for a second hand one, but nothing came up, so I bit the bullet and got it from the dealer. You might get luckier than I was, but there wasn't much out there second hand when I was looking.

Good luck!
 
Zedebee said:
Anybody got a sound generator for my N52 which doesn’t have one? Eerily, it’s the quietest Z4 I’ve ever driven.

I`m sure I have one . Will check later and get back to you . Current going rate is 500 quid were you aware :D
 
1536Z4 said:
going rate is 500 quid were you aware
TBH I wouldn’t be interested at that price. And if I’d known that, I would have taken the one off my last car before I sold it :(
 
https://www.ecstuning.com/b-genuine-bmw-parts/sound-generator-rubber-boot/13717556528/

You could always import it? The pipe and grommet were about £60 from memory...

Or just go to BMW, but this looks like it needs the extra sound generator, so is more expensive (assuming the ecs image is accurate)

These are what it looks like ECS provide

https://www.sytnerstevenagebmwparts.co.uk/p/131986947/13717556528.html

https://www.sytnerstevenagebmwparts.co.uk/p/BMW__Z4/Sound-generator/131988089/13747557368.html

And these you'd need regardless

https://www.sytnerstevenagebmwparts.co.uk/p/131986968/13717560282.html

https://www.sytnerstevenagebmwparts.co.uk/p/131986828/13717514865.html
 
Zedebee said:
1536Z4 said:
going rate is 500 quid were you aware
TBH I wouldn’t be interested at that price. And if I’d known that, I would have taken the one off my last car before I sold it :(

I "think" he was pulling your leg 8)
 
Zedebee said:
TBH I wouldn’t be interested at that price. And if I’d known that, I would have taken the one off my last car before I sold it

pvr said:
I "think" he was pulling your leg

I was indeed pulling your leg [ref]Zedebee[/ref], :rofl:

I have all the parts apart from the sealing gasket which is part number 13717514865 and you will need a torx screw which is part number 13627531817 . I also only have one foam bung but usually people take out one if not both .
 

Attachments

  • 20250514_154408.jpg
    20250514_154408.jpg
    123.4 KB · Views: 368
  • 20250514_154415.jpg
    20250514_154415.jpg
    174.8 KB · Views: 368
  • 20250514_154445.jpg
    20250514_154445.jpg
    120.1 KB · Views: 368
  • 20250514_154421.jpg
    20250514_154421.jpg
    194 KB · Views: 368
  • 20250514_154434.jpg
    20250514_154434.jpg
    153.7 KB · Views: 368
  • 20250514_154438.jpg
    20250514_154438.jpg
    206.2 KB · Views: 368
  • 20250514_161939.jpg
    20250514_161939.jpg
    96.3 KB · Views: 361
  • 20250514_161957.jpg
    20250514_161957.jpg
    122.3 KB · Views: 361
TriggerFish said:
https://www.ecstuning.com/b-genuine-bmw-parts/sound-generator-rubber-boot/13717556528/

You could always import it? The pipe and grommet were about £60 from memory...

Or just go to BMW, but this looks like it needs the extra sound generator, so is more expensive (assuming the ecs image is accurate)

These are what it looks like ECS provide

https://www.sytnerstevenagebmwparts.co.uk/p/131986947/13717556528.html

https://www.sytnerstevenagebmwparts.co.uk/p/BMW__Z4/Sound-generator/131988089/13747557368.html

And these you'd need regardless

https://www.sytnerstevenagebmwparts.co.uk/p/131986968/13717560282.html

https://www.sytnerstevenagebmwparts.co.uk/p/131986828/13717514865.html

Thanks for the info. I’m not sure I trust the ECS option. While the picture includes the sound generator, the part number is just for the rubber boot. Clearly, it is an option just to buy new parts from BMW.
 
1536Z4 said:
Zedebee said:
TBH I wouldn’t be interested at that price. And if I’d known that, I would have taken the one off my last car before I sold it

pvr said:
I "think" he was pulling your leg

I was indeed pulling your leg [ref]Zedebee[/ref], :rofl:

I have all the parts apart from the sealing gasket which is part number 13717514865 and you will need a torx screw which is part number 13627531817 . I also only have one foam bung but usually people take out one if not both .

:lol: If you are minded to sell, let me know how much you want for it posted. Feel free to PM me.
 
GenZed said:
I think Jingle has a spare🤔

I installed my sound generator (as my car changed from a 2.0 to the 3.0Si so never had it originally) but it didn’t make any difference for me even with both foams removed as my straight piped decatted exhaust is so loud :rofl:

I got lucky and found 1 for sale on Facebook marketplace for £40 (well, GenZed found it and sent me the link lol)
 
Back
Top Bottom