No5 usually chips in on these posts when he spots them, well versed in relocating the motors, I did mine myself and took a lot longer than the other guys who offer their services, however after doing mine I reckon another one would be a lot faster. The biggest problem is getting into the plastic housing the motor sits in as the lid is taped to the base and is very difficult to get off. The plastic container is also held in with zip ties and difficult to see in the depths of the well it sits in. I ended up using a long lever poked into the lid joint and using a pivot point in the boot levered the whole thing upwards so the ties broke and released the motor container. Once those ties were free it was simple to lift the unit up and back into the boot to relocate. My motor and pump were ok so it was just a relocation. Another tricky part is reattaching the parcel shelf retaining clips, they only go in one way and are a bit of a stretch to get them clipped back in given the room you have to work in. If No5 dosn't show up and your desperate give me a shout if you want me to have a go. No5 is your best bet if you have any problems with your motor or pump as he can revive them and has spares.