Rain sensor retrofit
- Thread starter Sajk
- Start date
Attleborough, Norfolk
I recall someone did look into this - its a lot of work i think.
Devon
I suspect that you'll find a load more info if you search for people doing this on the E46 - it's the same electrical system (for the most part), so if you can find guides there, they should explain the logic, even if you need a few different parts for the Z4 platform.
However... I think they used a different windscreen on the sensor equipped cars, so if you wanna go to that length, is up to you...
However... I think they used a different windscreen on the sensor equipped cars, so if you wanna go to that length, is up to you...
Works perfectly on mine, as it did on my Focus before. I’d not really consider another car that didn’t have it, same as auto lights.
ivanchen1211
Member
Is there any Z4 comes without rain sensor?
If you have changed the window, this is how you reattach the bracket to the window. The gap between the gap and the bracket have to be no air bubble for rain sensor to work perfectly.
If you have changed the window, this is how you reattach the bracket to the window. The gap between the gap and the bracket have to be no air bubble for rain sensor to work perfectly.
Yes. Many.
ivanchen1211
Member
If not, refer to this E46 article
DIY: RLS Retrofit
Hey, everyone. So, for the longest time, I've wanted to find a way to retrofit automatic lights and the rain sensor into my 2003 330Ci. Unfortunately, many of the DIYs online were either too vague in their instructions or were simply unfinished to the point of stopping in the middle of key...
