Intravee update Version 6.02-6993

RichardP said:
OK, when opening the COM port in the downloader, change the speed from 115,200 to 38,400, that's the default if the baud code in EEPROM is incorrect.
Click to expand...

Tried that, still gibberish. Tried lower speeds and still the same.

I'm gonna try using a different laptop. Hopefully tomorrow.

The only other thing and I don't know if this could be causing the problem. When I first Installed I had hiss over the BUS. I think it was you who suggested over on Intravention, alternative jumper positions? It didn't help with the hiss but wonder if this could be causing problems?

Thanks Again

Jim
 
RichardP said:
Try 57,600.
Click to expand...

Eureka.....it's working. :thumbsup:

Didn't work at 57,600....still gibberish.
Upped it to 115,200....no gibberish....correct echo....firmware updated. :D

Tried all the baud rates again after update completed and the only one that works for me is 115,200.

So thanks for all your help......would of given up without your assistance. Really appreciate that you've taken time to assist.

Regards

Jim
 
RichardP said:
Hmm, 115,200 is what it should be!

What were you using before?
Click to expand...

I'd been through all the baud rates from 115,200 downwards prior to you suggesting that the Intravee should be in "Radio" mode.

Can only think that I didn't retry the 115,200 again after.

Sorry about this......just hope someone else on here can get something from this if they run into similar problems.

Will have to try my original Startech lead again at some point.

Regards

Jim
 
Some apps default to 9600,n,8,1 and there's always the x-on/x-off vs DTR/RTS handshaking. RS-232 is a PITA. I still have some breakout boxes at home from my old engineering days :D
 
Changes from 6.02-6970

- Updated Spanish translation
- Added processor command to turn on the remote power line on the PXA-H800 on power up and off on power down.
- Added very basic support for the DVA-5205P DVD Player
- Improved H800 menu display, menus can be used as well as the BMW Tone and DSP controls.
- H700/H701/H800 processor menus are restricted to available functions.
- Small processor menu layout change to make processor type specific options appear in more logical locations.
- Added CDC announce on power up, this will enable the Intravee source to be selected immediately after updating the firmware or if the radio is turned off when the ignition is turned on.
- Change to disabling the Nav Audio prompt to make it more reliable.
- Added trap to prevent more than one timed CDC poll response if no polls are seen from the radio.
- Added decode of the radio poll messages to include the global address.
- Removed some debug messages.
- Added key action to toggle TV Video.
- Fixed 'off by one' bug when saving processor presets from the menu.
- Added 800 msec delay when switching between the Nav and Audio display to prevent the incorrect screen being displayed on power up when using the BM24.
- Fixed bug in 'Back' option of the Processor timing menu.
- Added retry of power up if no ack detected from HD radio.
- Added control of Parametric EQ settings from the OEM DSP menu for the PXA-H100.
- Added Maximum Initial Volume setting to prevent excessive volume on power up.
- Fixed bug displaying the Nav Volume set for the PXA-H100.
- Fixed bug displaying 'Nothing' to the High OBC.
- Moved Auto Pause from PDC Menu to Usage Options Menu.
 
Cheers. I was thinking more of the manual with the detailed instructions etc and the command line reference if it's changed
 
Just updated mine yesterday and a friends (after all the pain of previous attempts) and worked

Radio as Source, the highest baud setting and I used the tronisoft cable.

Very happy, and thanks to all for the assist.
 
Version 6.02-6993

Changes from V6.02-6985

Added option to name DAB, Sirius and XM preset bands with the "sbnX Name" command.
Added option to control individual lights on Lock and Unlock.
Increased internal menu stack size for 'Back' options.
Added aditional commands on switching away from the Intravee source to prevent corruption of the FMD station list on the BM54 radio. This may cause a short flicker of the display.

FIRMWARE
http://www.muga-uk.co.uk/ivfw256exp_extras_v6.02-6993.zip

USER GUIDE
http://www.muga-uk.co.uk/intravee_users_guide_v6.02-6993.pdf

UTILITIES (software)
http://www.muga-uk.co.uk/intraveeutilities.zip
 
mac27040 said:
Version 6.02-6993

Changes from V6.02-6985

Added option to name DAB, Sirius and XM preset bands with the "sbnX Name" command.
Added option to control individual lights on Lock and Unlock.
Increased internal menu stack size for 'Back' options.
Added aditional commands on switching away from the Intravee source to prevent corruption of the FMD station list on the BM54 radio. This may cause a short flicker of the display.

FIRMWARE
http://www.muga-uk.co.uk/ivfw256exp_extras_v6.02-6993.zip

USER GUIDE
http://www.muga-uk.co.uk/intravee_users_guide_v6.02-6993.pdf

UTILITIES (software)
http://www.muga-uk.co.uk/intraveeutilities.zip
Click to expand...


Thank You Mac. :thumbsup:
 
Updated and working, excellent stuff

BUT - I have updated my mates which is installed on an M3 E46 o6 plate and the lighting control isn't showing up.

The nav is set to Mk4-1/40 and Car type as E46 type 2, and i've downgraded and gone through all firmware sequentially just in case and nothing.
Are these updates just for the Z4? even the folding mirrors isn't an option or locking functions... any ideas?

Also for the Z4, the Auto lock... whats that? is it to lock the car if you forget?
 
You must log in or register to reply here.

Similar threads

M
Intravee update ivfw256exp_extras_v6.02-7018.zip
Replies
8
Views
562
mac27040
M
S
Can I update my Intravee with a Mac laptop?
Replies
9
Views
451
scorcher
S
A
Could someone send me the intravee firmware update software?
Replies
2
Views
212
aquazi
A
J
Intravee II Firmware Update
Replies
3
Views
1K
RichardP
R
A
Intravee Update
Replies
11
Views
796
VvrooomM
V
Back
Top Bottom