Hall Sensor 54347190735

NS66

NS66

Member
Seems i may need to replace a hall sensor and looking on the forum the E88 version 54347190735 is suggested - old threads I know and suggest around £20-£30 however my searches are showing £100 + is this just shortages or profiteering?

Any one know the best place to get those from currently?

TIA
 
NS66 said:
Seems i may need to replace a hall sensor and looking on the forum the E88 version 54347190735 is suggested - old threads I know and suggest around £20-£30 however my searches are showing £100 + is this just shortages or profiteering?

Any one know the best place to get those from currently?

TIA
Click to expand...
BMW profiteering

Sadly I don’t know of any other options
 
I got 2 spare hall sensor with a ram for a Toyota. For £20 few years ago. Also from LLL for a Mini about £15.
So try to be creative in your search.
Seem to used on a lot of cabrio's, Ferrari, Lambo, Toyota, Mini, BMW. Also Jaguar and Audi.
Try breakers.
 
Last edited:
But do you really need to replace the sensor.
How many actually fail.
Are you just taking what a obd reader tells you.
Might be just a broken wire or bad connector, my car has had both.
 
flybobbie said:
I got 2 spare hall sensor with a ram for a Toyota. For £20 few years ago. Also from LLLR for a Mini about £15.
So try to be creative in your search.
Seem to used on a lot of cabrio's, Ferrari, Lambo, Toyota, Mini, BMW.
Try breakers.
Click to expand...
Thanks - I’ve had a search on mini ones but also seem expensive as well. Will keep searching, not totally desperate yet 👍🏻
 
Prices utterly ridiculous for something with £1 of parts inside.
Someone needs to reverse engineer with a 3d printed housing.
 
Last edited:
flybobbie said:
Prices utterly ridiculous for something with £1 of parts inside.
Someone needs to reverse engineer with a 3d printed housing.
Click to expand...
The chip inside is well known. The magnet seems to be the more complicated part of this assembly;

E89-HS_cpr.jpg

Developing a 3D housing should be possible.
 
Last edited:
The dimensions of the housing are a limiting factor. And in fact, the special format of this magnet, I can't imagine how to produce.
 
You must log in or register to reply here.
Back
Top Bottom