FREE Z4 interior bits

F

foxy-stoat

Member
 Eastbourne
Well now, parting out my silver 2.2 SE 2004 pre-face lift Z and have lots of bits listed on ebay at the moment. If anyone wants any interior plastic bits or nuts, bolts, plastic retaining clips or little bits for free on collection, let me know, be willing to package them up for £5 plus postage or if its small enough it fit in a envelope then I'll ask for £1 to cover postage and messing about.......will make donations to the club for any bits that are sold.

I do have both inner arch liners, a little damaged but still hold in the arch ok but not the front plastic bits. These are also free but won't be posting them out so collection only.

Looking at scraping the rest of it at then end of March, after the engine/suspension/diff etc is out, and will be chucking everything will little or no value then.

Once I have my money back on this I'll post up the remaining parts I have left on here for minimal cash.

I thank you!

:)
 
Do you have a the screw cover for the center console (part no 19), and the flat bit of plastic under hand brake handle (part no 12 I think) and the plastic interior door handle pull covers?

http://www.zpost.com/forums/attachment.php?s=6075bdb366b8b5b79636906578ee95e8&attachmentid=821603&stc=1&d=1361304353

Thanks
 
do you have a third brake light and kidney grills? Pm'd you mate but not sure if it has gone to your inbox.
 
Do you have the little bolt covers from the engine covers?

And also the expanding screw rivets from the rad cover?

If you do I will have the lot

Thanks

Sent from my GT-I9300 using Tapatalk 2
 
sam1832 said:
Do you have the little bolt covers from the engine covers?

And also the expanding screw rivets from the rad cover?

If you do I will have the lot

Thanks

Sent from my GT-I9300 using Tapatalk 2
Click to expand...

Rad cover bolts I have - pm me your address.
Not sure about the engine cover...if you can take a pic of your engine and PM I'll see if I have them.

Wayne
 
glad46 said:
Do you have a the screw cover for the center console (part no 19), and the flat bit of plastic under hand brake handle (part no 12 I think) and the plastic interior door handle pull covers?

http://www.zpost.com/forums/attachment.php?s=6075bdb366b8b5b79636906578ee95e8&attachmentid=821603&stc=1&d=1361304353

Thanks
Click to expand...

Very probabley although I have stripped out all the area....all bolts n screws are in a big pot so will have a look through.

W
 
Oh wow, good stuff. Ill take a look in the old cockpit and see what I could do with :) Ive got the exact same model so this is a great thread to keep an eye on. :)
 
foxy-stoat said:
sam1832 said:
Do you have the little bolt covers from the engine covers?

And also the expanding screw rivets from the rad cover?

If you do I will have the lot

Thanks

Sent from my GT-I9300 using Tapatalk 2
Click to expand...

Rad cover bolts I have - pm me your address.
Not sure about the engine cover...if you can take a pic of your engine and PM I'll see if I have them.

Wayne
Click to expand...

Thanks pm sent

Do you want anything to cover postage costs?

Also do you have the two bolts that secure the airbox and the two clips they screw into?

On top of the cover that covers the intake manifold is two screws that holds that cover on. Two covers go over the screws

Here is my engine bay
20130106_182650_zps4a26791c.jpg


You can see the back one is missing lol



Sent from my GT-I9300 using Tapatalk 2
 
nightyard said:
Do you have the screw for the panel below the glovebox...mines dangling down and needs a screw to secure it!! :cry:
Click to expand...

Yep

PM your address and I'll get one out to you, although its just a black screw...you must have one laying around !!
 
sam1832 said:
foxy-stoat said:
sam1832 said:
Do you have the little bolt covers from the engine covers?

And also the expanding screw rivets from the rad cover?

If you do I will have the lot

Thanks

Sent from my GT-I9300 using Tapatalk 2
Click to expand...

Rad cover bolts I have - pm me your address.
Not sure about the engine cover...if you can take a pic of your engine and PM I'll see if I have them.

Wayne
Click to expand...



Thanks pm sent

Do you want anything to cover postage costs?

Also do you have the two bolts that secure the airbox and the two clips they screw into?

On top of the cover that covers the intake manifold is two screws that holds that cover on. Two covers go over the screws

Here is my engine bay
20130106_182650_zps4a26791c.jpg


You can see the back one is missing lol



Sent from my GT-I9300 using Tapatalk 2
Click to expand...

Arrr, I have the air box bits...but that engine cover bit I think I will have to let that go with the engine when I sell it, sorry.

I think just donate a couple pounds to the club.

:)
 
Some of the bits stripped out:

WP_000129_zps2b5a7081.jpg


State of the car at the moment:

WP_000124_zpsf5276aa3.jpg

WP_000123_zps34fc7ff5.jpg

WP_000125_zpsea70e5b9.jpg

WP_000122_zps48467875.jpg


If you see anything your after drop me a PM...if its little or no value then its pretty much free.
 
How long have the current cambelt / timing belt been on the car, might be worth snapping up a cheap set incase mine go? Or not a worthwhile investment? Im the most mechanically unsavvy individual there is... :)
 
bradmarsh1989 said:
How long have the current cambelt / timing belt been on the car, might be worth snapping up a cheap set incase mine go? Or not a worthwhile investment? Im the most mechanically unsavvy individual there is... :)
Click to expand...

Hi

No idea about the belts but I wouldn't be robbing bits off the engine as I want to sell it running....also I wouldn't be re-using secondhand belts if I could help it...chain driven aren't they thou and don't normally snap.
 
foxy-stoat said:
sam1832 said:
foxy-stoat said:
Rad cover bolts I have - pm me your address.
Not sure about the engine cover...if you can take a pic of your engine and PM I'll see if I have them.

Wayne
Click to expand...



Thanks pm sent

Do you want anything to cover postage costs?

Also do you have the two bolts that secure the airbox and the two clips they screw into?

On top of the cover that covers the intake manifold is two screws that holds that cover on. Two covers go over the screws

Here is my engine bay
20130106_182650_zps4a26791c.jpg


You can see the back one is missing lol



Sent from my GT-I9300 using Tapatalk 2
Click to expand...

Arrr, I have the air box bits...but that engine cover bit I think I will have to let that go with the engine when I sell it, sorry.

I think just donate a couple pounds to the club.

:)
Click to expand...

Excellent I will have the airbox bits aswell then please

Yea thats understandable about the covers, thought it was worth an ask as I dont think they have those as individual parts and mine have been lost before I got the car


bradmarsh1989 said:
How long have the current cambelt / timing belt been on the car, might be worth snapping up a cheap set incase mine go? Or not a worthwhile investment? Im the most mechanically unsavvy individual there is... :)
Click to expand...

It has a timeing chain to start with, the belts you see is the serpentine belt and the ac belt

Both of which cost under £40 new so no point of risking a seccondhand belt.


Sent from my GT-I9300 using Tapatalk 2
 
You must log in or register to reply here.
Back
Top Bottom