E85/E86 ISOFIX Passenger Seat Bracket

[tomscott]

Hi All,

I am looking for the Isofix attachment for the passenger seat. Or if you have a full seat with the integration I would also be interested.

I have an 18 month old who is obsessed with the car and would like to take him out with me/to shows etc. I have a solution for the airbag deactivation but need the metal anchor frame for the seat!

Really hope someone has one!

Cheers

 

[Usel]

I am breaking a car with isofix so I could provide you with everything if wanted?

 

[enuff_zed]

I am breaking a car with isofix so I could provide you with everything if wanted?

Rob, if that is the bracket from the seat I have here then yes it can be taken off it…… but you are the expert

 

[tomscott]

That would be great!

Il PM you

Cheers

 

[tomscott]

I am breaking a car with isofix so I could provide you with everything if wanted?

Rob, if that is the bracket from the seat I have here then yes it can be taken off it…… but you are the expert

As far as im aware its a bolt on component?

 

[Usel]

I am breaking a car with isofix so I could provide you with everything if wanted?

Rob, if that is the bracket from the seat I have here then yes it can be taken off it…… but you are the expert

I have another seat with an isofix bracket. We'll leave yours on the seat

 

[Usel]

I am breaking a car with isofix so I could provide you with everything if wanted?

Rob, if that is the bracket from the seat I have here then yes it can be taken off it…… but you are the expert

As far as im aware its a bolt on component?

Yes it is a bolt on part

 

[Usel]

I have the parts ready:





You need the original key for the lock. My key for my Zed will turn it if I half insert the key and turn. Apparently it's possible to open up the lock and remove the pins so any key can be used.

 

[Usel]

Wiring ready and labeled:



From the airbag indicator light the violet/white wires goes to the fuse box connector X11007 and is pin 11:





The grey wire from the indicator light goes to X16705 at the airbag control module, pin 7







The the blue and white goes from the key switch to the airbag control module connector X16708. White is pin 7 and blue is pin 17:

 

[enuff_zed]

That's a lot of work you have put in there Rob.

 

[tomscott]

Amazing stuff thanks so much!

 

[orange]

Thread resurection! I don't suppose anyone happens to have a ISOFIX bracket for the passenger seat? Thanks

 

[dimpanag]

Hi all, same topic for me as well. The above images are absolutely fantastic, I will check if the wiring is already pre-installed in my 2006. In case someone has any of the above please contact me. Thank you

 

[Cv6benplus]

I have the parts ready:

View attachment 180174

View attachment 180175

You need the original key for the lock. My key for my Zed will turn it if I half insert the key and turn. Apparently it's possible to open up the lock and remove the pins so any key can be used.

View attachment 180176

Hi.
I thought I'd investigate and can confirm that the pins can be removed.
Using a small screwdriver, remove the 2 screws.
The black cover just slider off.
Then the circuit board with 2 pins slides off.
Then the white inner plastics slide out, there's 2 parts but the go together.
Then you can see inside, either side of where the key goes, are 2 tiny plastic retainers. Carefully apply pressure to push the barrel out while fractionally moving one pin, then the other.
Then, you'll have the barrel out.
Use pliers to grip the 4 metal pins and pull them out also with a tiny spring.

Reassembly is the opposite of disassembly.
Now any key will work.

 

[Ilogik]

As far as I'm aware if it's front facing and the seat is far enough back the air bag doesn't need to be disabled? I take my little boy out in my coupe, with a belt securing car seat.

 

[dimpanag]

As far as I'm aware if it's front facing and the seat is far enough back the air bag doesn't need to be disabled? I take my little boy out in my coupe, with a belt securing car seat.

I checked as I would like to do the same (my son is almost 4 and around 105cm), but I read online that the airbag activation is very 'aggressive' which means that leaves very little room when deployed. I am more worries about the feet, as they wont be bent as an adult's and hey protrude from the seat.

 

[Cv6benplus]

Will be creating a bespoke listing for these. Sold separately.

 

[dimpanag]

Hi again, I have all the components for the retrofit except the wiring, which I believe can be built. Does anyone have to recommend a garage that can do that or have done it in the past? I am located in Scotland but willing to travel for the right place.
Thank you