doing stubby mod.

LucasG88 said:
too true....now what other mods to do that are not that expensive! suggestions?
Click to expand...

Sound Generator (if you have a 3.0) Free :) , you can always retrofit if you have a 2.5i

CDV removal - Free :)


Sent from my iPhone using Tapatalk
 
Adamski said:
LucasG88 said:
too true....now what other mods to do that are not that expensive! suggestions?
Click to expand...

Sound Generator (if you have a 3.0) Free :) , you can always retrofit if you have a 2.5i

CDV removal - Free :)


Sent from my iPhone using Tapatalk
Click to expand...


Sound generator? I have a 3.0 I no understandy !!
 
Macca said:
So.......how did he get the broken piece out ?????
Click to expand...

drilled it out, thus creating a new hole to screw 'bender' (as in Bender's (futurama) antenna according to my dad) in to the new hole.
 
Macca said:
Adamski said:
LucasG88 said:
too true....now what other mods to do that are not that expensive! suggestions?
Click to expand...

Sound Generator (if you have a 3.0) Free :) , you can always retrofit if you have a 2.5i

CDV removal - Free :)


Sent from my iPhone using Tapatalk
Click to expand...


Sound generator? I have a 3.0 I no understandy !!
Click to expand...

EDIT - just follow Stuart's link above. I'm too slow :headbang:

There's a pipe which plumbs induction roar into the cabin. It is dulled down by two bits of foam sound insulation. Remove said foam and you'll hear a hearty roar in the cockpit. A 2 minute mod which will make you grin from ear to ear every time you push the loud pedal :D

There's a "how to" guide on here. Do a quick search and you'll find it :thumbsup:


Sent from my iPhone using Tapatalk
 
Same happened to me.

You can replace the base for a tenner or so.

See here for my tale:
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=13284&p=198660&hilit=stubby#p198660
 
Adamski said:
EDIT - just follow Stuart's link above. I'm too slow :headbang:

There's a pipe which plumbs induction roar into the cabin. It is dulled down by two bits of foam sound insulation. Remove said foam and you'll hear a hearty roar in the cockpit. A 2 minute mod which will make you grin from ear to ear every time you push the loud pedal :D

There's a "how to" guide on here. Do a quick search and you'll find it :thumbsup:


Sent from my iPhone using Tapatalk
Click to expand...

that for the 2.5? can't find it after searching on the how to bit
 
LucasG88 said:
Adamski said:
EDIT - just follow Stuart's link above. I'm too slow :headbang:

There's a pipe which plumbs induction roar into the cabin. It is dulled down by two bits of foam sound insulation. Remove said foam and you'll hear a hearty roar in the cockpit. A 2 minute mod which will make you grin from ear to ear every time you push the loud pedal :D

There's a "how to" guide on here. Do a quick search and you'll find it :thumbsup:


Sent from my iPhone using Tapatalk
Click to expand...

that for the 2.5? can't find it after searching on the how to bit
Click to expand...
I believe that doing this is only an option on the 3.0i or 3.0si. Here is a how too link...
http://www.z4-forum.com/forum/viewtopic.php?f=30&t=15035
 
I thought it was just a 3litre jobby. hmmm I think I need a new gear knob on mine. previous owner has chipped it (guessing from his watch) and for some reason. put a 6 speed knob on even though it's only a 5 speed :?
 
We seem to both be at similar stages in our Z4 lives, I added a stubby to mine yesterday as well!

img20120118130654.jpg

img20120118130815.jpg


LucasG88 said:
I thought it was just a 3litre jobby. hmmm I think I need a new gear knob on mine. previous owner has chipped it (guessing from his watch) and for some reason. put a 6 speed knob on even though it's only a 5 speed :?
Click to expand...

I added the ZHP to mine today, I'd highly recommend it. Feels much better and looks good too! :D

knobside.png

knobtop.png
 
You must log in or register to reply here.
Back
Top Bottom