Coding Remote Window Close and Folding Mirrors

[javis20]

I won't have opportunity to try again till Sunday. I'll let you know how it goes.

 

[bmw665]

enzed4 , thank you for looking deeper into the issues. That sounds like the answer. In the US you need CA to control the top down. If I used Carista maybe I can program it to work. I know Carly can't do it

 

[javis20]

I did the NFRM coding again and idrive display still doesn't close and open. When i open with notepad the changes were made. Wondering if something in the file is corrupt.

Something I noticed. The NFRM file is 36K. When I edit it, save as a .MAN and execute it, a new FSW_PSW.trc file appears in my Work folder. This file is 234K, apparently all the modules. When I search the file, FH_KOMFORT_MIT_SUBST is not active and ASP_EINKLAPPEN is active.

Remember, I previously coded the CAS module and went a planned. But just to double check, I again accessed the CAS module and listed the contents and confirmed that in the 8K CAS file, FH_KOMFORT_MIT_SUBST is set to active.

So basically, FH_KOMFORT_MIT_SUBST is set to active in the CAS 8k module file, but set not active in the 234K file for all modules.

Anyway, that's it for me. I'm done.

 

[javis20]

Well, I gave it one more shot and got it working. Used NCS Dummy this time. And i had to enable the two window options to open and close.
I think there was another option that needed to be set active. I'll check.

Still no where on top down with remote.

 

[Chippie]

Well, I gave it one more shot and got it working. Used NCS Dummy this time. And i had to enable the two window options to open and close.
I think there was another option that needed to be set active. I'll check.

Still no where on top down with remote.

Glad you managed to get it sorted, i can only think you may have left a space in front of “aktiv” when deleting “nicht” and using dummies writes it correctly

 

[javis20]

I had to set all the following active for mine to work;

KOMFORTOEFFNUNG_FB
KOMFORTSCHLIESSUNG_FB
KOMFORTOEFFNUNG
KOMFORTSCHLIESSUNG
KOMFORTSCHLIESSUNG_PA
FH_KOMFORTF_MIT_SUBST

Thanks for all the help Chippie