changing CF emblem on the bonnet question...

[Dj-Fille]

Just installed carbon fibre emblem on the booth (see pict below) and want to change the one on the bonnet also, will this emblem fit on the z4 or do i have to make it fit...?
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&item=300496406961&ssPageName=STRK:MEWNX:IT

Grtz

 

[Mafoo]

You have to make the bonnet one fit. I used a Dremel to file away the rear until it flush fit. I then used silicone to bond to the body.

 

[Dj-Fille]

You have to make the bonnet one fit. I used a Dremel to file away the rear until it flush fit. I then used silicone to bond to the body.

ok, if that is all that i have to do, i'll give it a go... ;-)
But is the size of the ones i mentioned ok? 73 mm?
Thx

 

[sbtwister]

Same here. Bit of work with the Dremel - be patient. I used double sided 3M tape to hold - been working fine for well over a year. Sorry, don't remember the size....

 

[Anonymous]

Worked for me too, just dremel the back and sides at 10am and 2pm, 4pm and 8pm etc, slowly slowly catchy monkey!

 

[Hotride]

I dont have a Dremmel, and it took me about 2-3 hours with sand paper , so do yourself a favour and get one if you dont already, needs a good shave to fit on the bonnet.

I bought this kit http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260480279532&viewitem=#ht_8590wt_1165 , so I would have to assume the 73mm emblem is right for the Bonnet (the sides and rear badge are same size, and bonnet is a bit smaller)

 

[Anonymous]

I don't own a dremmel and the last time I tried to mod it to fit i went through the weave, I would be willing to pay someone to do one for me.......any offers :?

 

[Hotride]

just swing by my place and ill do it for ya :roundel:

 

[aquazi]

I don't own a dremmel and the last time I tried to mod it to fit i went through the weave, I would be willing to pay someone to do one for me.......any offers :?

If you were closer i'd do it for free.. only takes 5 mins!

Here is a pic of the bits i dremelled coloured in black:

 

[Dj-Fille]

received the carbon fibre emblem this morning... mission accomplished ;-)