Breaking E85 2.0 Facelift - Silver Grey - lots of small bits left

True-Blue said:
enuff_zed said:
enuff_zed said:
Yup, I was trying to keep it watertight inside as long as possible, but now at the point of starting on the inside, so should have it for you in the next couple of days. Don't worry, got your name on it. :thumbsup:
[ref]True-Blue[/ref], sorry, life got in the way. Not had a chance to remove that panel yet. Not forgotten you. :thumbsup:
.

No rush :thumbsup:
Hi mate, finally got the panel off. Looked really good but once it was off the car it showed a hairline crack right in the middle to the rear of the access panel.
Sorry to have kept you waiting for nothing.
 
enuff_zed said:
True-Blue said:
enuff_zed said:
[ref]True-Blue[/ref], sorry, life got in the way. Not had a chance to remove that panel yet. Not forgotten you. :thumbsup:
.

No rush :thumbsup:
Hi mate, finally got the panel off. Looked really good but once it was off the car it showed a hairline crack right in the middle to the rear of the access panel.
Sorry to have kept you waiting for nothing.

No worries, :thumbsup:
 
enuff_zed said:
Next offering from the poor old 4-pot:
A pair of excellent condition rear lights.
I'd say full working order but tbh, every time I jumped out and ran to the back the brake lights had gone out again. But no-one ever ran into the back of me so they must be working? :D
As usual I referred to eBay for a price guide. Are they mad??
I'll start at a more sensible £140 the pair including postage to UK addresses.
IMG_4458.jpg
IMG_4459.jpg
IMG_4460.jpg
IMG_4461.jpg
Price dropped to £120 posted.
 
Full set of hoop covers. Not drilled for a wind deflector. Couple of tabs broken but will not affect secure fitment.
Come with all four rubber 'seals' in good condition.
£30 delivered to UK addresses.
IMG_4534.jpg
IMG_4535.jpg
 
Centre console rear upper panel in black.
Hinged push sections in good working order.
One clip broken but does not adversely affect the fitment.
£25 delivered to UK addresses.
IMG_4537.jpg
IMG_4538.jpg
 
Set of facelift heater vents, with the silver tabs.
Nice upgrade for a pre-facelift.
£70 the set, posted to UK addresses.

(NB. I have given [ref]secondtothird[/ref] nearly two weeks to respond regarding the centre vent, and am now offering the complete set to the first taker.)
IMG_4536.jpg
 
A few more bits:
Heater resistor (Hedgehog) - £25
Pair of bonnet struts - £15
Microswitch (this is the same part for the parcel shelf tray AND the centre storage lid light - £10
Storage cubby lock and motor - £30
Handbrake gaiter - £15

All prices include postage to UK addresses.
IMG_4550.jpg
IMG_4553.jpg
IMG_4551.jpg
IMG_4549.jpg
IMG_4552.jpg
 
I'm just preemptively asking about the glove box lid / assembly. My hinge is broken but unsure exactly what I need to replace, just the lid or the whole thing. I will go out and check tomorrow when the rain has stopped lashing down, but do you have any of the parts available, and in black?
 

Attachments

  • glove box.jpg
    glove box.jpg
    39.4 KB · Views: 925
SimonAW said:
I'm just preemptively asking about the glove box lid / assembly. My hinge is broken but unsure exactly what I need to replace, just the lid or the whole thing. I will go out and check tomorrow when the rain has stopped lashing down, but do you have any of the parts available, and in black?
Ah sorry, sold it to Alan_G only two days ago.
 
A rear cover or shield has disintegrated at the bolts. I'm currently away on holiday, it happened the day before I left.

I believe it is this part 51487047808 from real OEM but I've not been able to get under to confirm or whether repair washers may be enough.

Is this piece available and in okay condition? I can confirm whether I require it or not when I'm back in 2 weeks time

Thanks,
Andy
 
Andy Tate said:
A rear cover or shield has disintegrated at the bolts. I'm currently away on holiday, it happened the day before I left.

I believe it is this part 51487047808 from real OEM but I've not been able to get under to confirm or whether repair washers may be enough.

Is this piece available and in okay condition? I can confirm whether I require it or not when I'm back in 2 weeks time

Thanks,
Andy
Hi Andy. I’m out at the moment. Will look up that number and let you know. Shell has gone now so depends if it’s something I took off
 
[ref]Andy Tate[/ref], this is the part you want.
All in good condition with the exception of one bolt hole in the middle.
I can repair this with a large stainless washer and aluminium tape if needed.
IMG_4580.jpg
IMG_4581.jpg
 
Time for a bump up to hopefully clear my work-bench?
Still lots of the smaller bits left looking for good homes.
A/C switches, bonnet struts, column switches on slip-ring, radiator fan, engine bay braces, EWS module, heater vents, hedgehog, horns, LCM, petrol flap & locking actuator, pair of facelift rear lights, roll hoop covers and lower seals, roof module, steering wheel, tweeter, wiper motor & linkage, scuttle panel, the list goes on.
 
Have you still got the car/engine?looking for a plastic valve cover part no1,the no 8 screw in diagram has pulled out the threaded insert,I’ve repaired/bodged and it’s not leaking,but obviously it’s not ideal.
 

Attachments

  • IMG_0963.png
    IMG_0963.png
    480.6 KB · Views: 555
Back
Top Bottom