FOR SALE BMW Z4 M Brake Cooling Kit

For Sale
AndyBeech said:
I was at Combe today and even with the ducts had a bit of fade, was just one of those hot days where it'll happen regardless towards the end of the stint. Probably didn't help not much left on the front pads though tbh.

I meant to do a thread for a group buy to get a bit of organisation on it but been uber busy, will get round to it. If anyone wants to start the ball rolling then feel free and I'll get round to contributing to it.
Click to expand...

Running on low (e.g., <=5mm thickness) pads will bring way MORE heat into the pistons and transfer to fluid. No ducting will help in that scenario under heavy braking corners. Better off swapping to new pads midday or dialing it back a lot and avoid any serious threshold braking imo.
 
3002 tii said:
Running on low (e.g., <=5mm thickness) pads will bring way MORE heat into the pistons and transfer to fluid. No ducting will help in that scenario under heavy braking corners. Better off swapping to new pads midday or dialing it back a lot and avoid any serious threshold braking imo.
Click to expand...

Yup exactly. Wasn't chasing lap times so all good.
 
3002 tii said:
Not that I had any doubts but this kit works. Did a recent track day where I was able to test the brakes ability to go deeper/further on the main straight where I typically hit 140mph+. After repeated laps, pedal remained firm. After coming home, I inspected the pads and calipers and confirmed the dust boots looked good. I opted for the 2.5” inlet for ease of routing if the 2.5 works this well, I’m sure the 3.0” will be even better.
Click to expand...
I am also looking at the 2.5" for ease of routing - in hindsight, would you have gone with the 3" or is the 2.5" already tricky enough for clearances of pipe routing? Sounds like you're happy with the 2.5"?
 
Westersund- that's ok I'm not an "M", I can make my own ducts and hoses, its the backing plates I'd really like to have.
"[email protected]" I'm in Northern Nevada, USA and my zip is 89403. I can Paypal or Venmo, or Zelle
Your pictures are a big help., you can find me on Facebook too for racing pictures etc.
 
Whats happened? I believe you and I had an agreement to buy brake ducts. I sent a Pay Pal of $290. I haven’t heard anything since. Can you reach out to me please?
 
racerdave1 said:
Whats happened? I believe you and I had an agreement to buy brake ducts. I sent a Pay Pal of $290. I haven’t heard anything since. Can you reach out to me please?
Click to expand...
I don’t know why you’d think this is the best approach when we already communicate via e-mail. Trying to get me a bad rep when I’m not the one at fault.

Just to make it crystal clear, you haven’t sent ME any money. If you’ve sent money to someone you have misspelled my PayPal and you’ll have to report it to PayPal. Sending me URL’s to a polish website to proove you’ve sent me money thinking I will click it like a moron you’re mistaken.

I’ve been doing this for over 8 years and I haven’t done a customer wrong and I’m not planning to either.
 
Westersund said:
I don’t know why you’d think this is the best approach when we already communicate via e-mail. Trying to get me a bad rep when I’m not the one at fault.

Just to make it crystal clear, you haven’t sent ME any money. If you’ve sent money to someone you have misspelled my PayPal and you’ll have to report it to PayPal. Sending me URL’s to a polish website to proove you’ve sent me money thinking I will click it like a moron you’re mistaken.

I’ve been doing this for over 8 years and I haven’t done a customer wrong and I’m not planning to either.
Click to expand...

It's been said before but there's been an odd increase in overseas members on here all of sudden wanting to buy parts randomly. Effing scammers everywhere, report to admin :thumbsup:
 
You must log in or register to reply here.
Back
Top Bottom