BMW Performance brake retrofit

[Reamesy]

A little work on the rear to match the front.

Used 2K lacquer as it hardens very well. Especially after an hour in the over at 80 degrees for an hour.

All back together. Job done

 

[B21]

A little work on the rear to match the front.

Used 2K lacquer as it hardens very well. Especially after an hour in the over at 80 degrees for an hour.

All back together. Job done

You do more in a day than I do in a month…

Which 2k lacquer did you use ?

 

[Reamesy]

Lacquer. https://amzn.eu/d/gYhUPgo

Paint which was superb to use. https://www.ebay.co.uk/itm/135280275503?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_2cesjrasoi&sssrc=4429486&ssuid=GDP08vm4SN-&var=&widget_ver=artemis&media=COPY

A good tip for rattle cans is to stand them in hot water for 10 mins before use. Especially this time of year. I also warm up the component before painting.

 

[B21]

Lacquer. https://amzn.eu/d/gYhUPgo

Paint which was superb to use. https://www.ebay.co.uk/itm/135280275503?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_2cesjrasoi&sssrc=4429486&ssuid=GDP08vm4SN-&var=&widget_ver=artemis&media=COPY

A good tip for rattle cans is to stand them in hot water for 10 mins before use. Especially this time of year. I also warm up the component before painting.

I assume you’re hoping that temperature won’t be an issue ?

 

[Reamesy]

If we are talking about the paint it just helps it flow nice when spraying. Never had issues in years

 

[B21]

If we are talking about the paint it just helps it flow nice when spraying. Never had issues in years

I meant on track days ..red hot discs etc

 

[Reamesy]

If we are talking about the paint it just helps it flow nice when spraying. Never had issues in years

I meant on track days ..red hot discs etc

Track days? Never done it. Not saying never will. I’ll cross that bridge when I get there.