I've just noticed I've no power to either of my auxiliary sockets (ash-tray and arm rest)
A search on here seems to point to fuse No.8 and a PITA job to get to it
After reading some of the threads I want to make sure I'm tackling the right area/panel
Under the glove box in the LH foot-well there is a grey horizontal panel, (full width/depth of the foot-well) however I can't see any locking nut.
Along the front edge there are 4 screws and in the front RH corner a hole where I assume another aux power unit could be fitted
Through several cut-outs I can see a piece of paper - fuse list?
I haven't attempted to tackle it in the dark, but as it all looks relatively accessible is the infamous fuse box from Hell?
Or do the problems start when you take the 4 screws out?
Any advice gratefully received
(Car is 2.0l 2012)
A search on here seems to point to fuse No.8 and a PITA job to get to it
After reading some of the threads I want to make sure I'm tackling the right area/panel
Under the glove box in the LH foot-well there is a grey horizontal panel, (full width/depth of the foot-well) however I can't see any locking nut.
Along the front edge there are 4 screws and in the front RH corner a hole where I assume another aux power unit could be fitted
Through several cut-outs I can see a piece of paper - fuse list?
I haven't attempted to tackle it in the dark, but as it all looks relatively accessible is the infamous fuse box from Hell?
Or do the problems start when you take the 4 screws out?
Any advice gratefully received
(Car is 2.0l 2012)