Aircon fault- codes

bigwinn

bigwinn

Elite
 Lincoln UK
Site Supporter
The ongoing saga of the aircon not working, after using INPA and finding no immediate notable issues I have now scanned with Carly:

Air Conditioning
Fault code: 00000F
Fault code: 000008
Relay GEBLAESE max / Relay auxiliary fan / Waermetauscher sensor left / AUC sensor / Info AUC sensor / Rear blowers / Dme-ac / Water valve / Free 0x0F / 15 free
Interior temperature sensor in the control unit / Suction errors / Supply voltage RMP / Rear compartment flap motor IHKA / Pressure sensor / Clamp 30 / Nc 8 / Geblaesepotentiometer / Free 0X08 / Waermetauscher sensor right
Auxiliary Heating
Fault code: 0000DA Vorkatsonde 1 signal swing / CDKCHDEV - CAN timeout HDEV / Signal KVA2 / CAN module warning level reached / FS backrest head: blocking front / Internal index 233

I'll get on google, but anyone had experience of these?

Stuart
 
bigwinn said:
enuff_zed said:
bigwinn said:
after doubting myself, went back and checked the green wire... again
Click to expand...
And................. ?
Click to expand...

Its fine and dandy
Click to expand...
Kind of annoying. Would have been a lovely simple answer.
Sorry mate, not a lot I know about aircon. Done probably the same googling you have, but it's not really helping.
Look on the bright side, if you'd gone and bought a coupe you couldn't even get the benefit of the fresh air. :D
 
enuff_zed said:
bigwinn said:
enuff_zed said:
And................. ?
Click to expand...

Its fine and dandy
Click to expand...
Kind of annoying. Would have been a lovely simple answer.
Sorry mate, not a lot I know about aircon. Done probably the same googling you have, but it's not really helping.
Look on the bright side, if you'd gone and bought a coupe you couldn't even get the benefit of the fresh air. :D
Click to expand...

I do keep consoling myself with that fact!!!

Ah well
 
I’ve popped my central ac control panel out to see if anything obvious- the sensor in the dash is very gunked up so will see if that makes a difference

I note that I don’t think you can swap hvac control panels out like for like- without coding

But- if the sensor is defective could you replace that? Looks like it unscrews?

Off to look for the relays now
 
You must log in or register to reply here.
Back
Top Bottom