I've had a couple of EML codes appear ( E0171 & E0174 which are "Engine bank too lean" messages) and quickly identified the problem to a perrished Air intake hose which has the smallest of cracks in it.

I've been to BMW, quoted the Chassis number and collected with the required (non-stocked) part, (B13.54.514.880) ahead of getting my fingers dirty today and changing it. All was going well and the old boot came off in about 20 minutes. I then got the new one out of the bag and it's totally different !

Ive checked the websites and BMW have given me the correct boot for a 2004, E85 2.5, M54 Engine. However, the one I need is listed as required for the 3.0 engine (part B13.54.514.867). Have I got the wrong boot, or the wrong engine ? I'm now wondering if somewhere in the previous ownerships someone has changed the engine !! ( which would explain it still singing at 124,500 miles
)
Below you can see the 2 inch pipe connection I need for the missing hole (circled to the right) with the main engine intake circled to the left:

I definitely need the third hole as I need the main tube to run from the Air Filter, into the engine and the third outlet (approx 2 inches dia) to run on towards the bulkhead. there is also a small 1cm pipe that comes off the small spout.
Below are the results of a google search, that seems fairly consistent on numerous websites, showing the extra hole compatible with the 3.0 engine, so Ive either got a modified air system or or something 's else has been changed ??

Has anyone else found this, or can anyone shed some light on it ?
My Local BMW dealer doesn't open Sundays, so I've now got a car that's going to be laid up until Wednesday I'd estimate, so I'll have to find something else to tinker with whilst it's in bits !

I've been to BMW, quoted the Chassis number and collected with the required (non-stocked) part, (B13.54.514.880) ahead of getting my fingers dirty today and changing it. All was going well and the old boot came off in about 20 minutes. I then got the new one out of the bag and it's totally different !

Ive checked the websites and BMW have given me the correct boot for a 2004, E85 2.5, M54 Engine. However, the one I need is listed as required for the 3.0 engine (part B13.54.514.867). Have I got the wrong boot, or the wrong engine ? I'm now wondering if somewhere in the previous ownerships someone has changed the engine !! ( which would explain it still singing at 124,500 miles

Below you can see the 2 inch pipe connection I need for the missing hole (circled to the right) with the main engine intake circled to the left:

I definitely need the third hole as I need the main tube to run from the Air Filter, into the engine and the third outlet (approx 2 inches dia) to run on towards the bulkhead. there is also a small 1cm pipe that comes off the small spout.
Below are the results of a google search, that seems fairly consistent on numerous websites, showing the extra hole compatible with the 3.0 engine, so Ive either got a modified air system or or something 's else has been changed ??

Has anyone else found this, or can anyone shed some light on it ?
My Local BMW dealer doesn't open Sundays, so I've now got a car that's going to be laid up until Wednesday I'd estimate, so I'll have to find something else to tinker with whilst it's in bits !