Vanne's 2014 28i

[Vanne]

good to know, iam hoping it will settle a bit, when i was at the tire shop today on the lift it looked pretty dead on equal sides..

 

[B21]

good to know, iam hoping it will settle a bit, when i was at the tire shop today on the lift it looked pretty dead on equal sides..

Depending if you preloaded all the axles prior to fitment ARBs/bushes/links can load/ restrict the spring a wee bit..

 

[Vanne]

Will see. Got my oil change stuff in yesterday. Might have a peek inside the chain guide too. So I'll do that today sometime while I figure out what to buy for the tranny.
Oh and the other screen turned up too. I'll start stuffing around with that a bit later. I also bought some alcantara fabric to fix up the lower dash. And I gotta rip off the drivers door card to sort the front of it not being in the right spot.
Next up will be the roof I think. I go to Seattle tomorrow , 2 new front rotors (for this jalopy) and a new z3 clutch kit waiting at the hotel for me hopefully ..

 

[Vanne]

What's the plan with the MHD Adapter? I didn't realise they supported the N20, or is it possible to upload someone's remote tune with it?

BTW they sure do support the n20. Was deciding between the jb4 and the mhd stage 1+ , apperently AI recons the hardware in the stock dme is better than the piggy back solution from JB, so will prob go with Mhd. Again gotta get the car running right first..

 

[B21]

BTW they sure do support the n20. Was deciding between the jb4 and the mhd stage 1+ , apperently AI recons the hardware in the stock dme is better than the piggy back solution from JB, so will prob go with Mhd. Again gotta get the car running right first..

e89 N20 was never supported by MHD…

Another AI conflation / hallucination

 

[Vanne]

Lol lucky... might need to swing the other way then. Luckily this is all for after I fix the roof. Thx for the heads up.

 

[B21]

BTW they sure do support the n20. Was deciding between the jb4 and the mhd stage 1+ , apperently AI recons the hardware in the stock dme is better than the piggy back solution from JB, so will prob go with Mhd. Again gotta get the car running right first..

BMS/Burger Motorsports JB4 Tuning Box for BMW N20/N26 (220i 228i 320i

JB4 Performance Module for BMW 2.0 Turbo Petrol N20 N26 – instant, reversible power for F-Series BMWs Looking for an easy, risk-free way to wake up your 2.0 turbo BMW without a permanent ECU flash? The JB4 performance module from Burger Motorsports is the proven plug-in power upgrade for the N20...

mjmodifications.co.uk

Or a custom tuner..last I heard the DME needed a piggy back wire to allow a flash tune..On E series

 

[B21]

Dropbox

www.dropbox.com

here's a detailed extract on tuning boxes and why for you not so bad.. enjoy

 

[Vanne]

BMS/Burger Motorsports JB4 Tuning Box for BMW N20/N26 (220i 228i 320i

JB4 Performance Module for BMW 2.0 Turbo Petrol N20 N26 – instant, reversible power for F-Series BMWs Looking for an easy, risk-free way to wake up your 2.0 turbo BMW without a permanent ECU flash? The JB4 performance module from Burger Motorsports is the proven plug-in power upgrade for the N20...

mjmodifications.co.uk

Or a custom tuner..last I heard the DME needed a piggy back wire to allow a flash tune..On E series

What about the other jb4 version?

BMW N20 JB4 Performance Tuner Module

BMW N20 JB4 tuner increases turbo performance with advanced control, real-time data logging, multiple maps, and smooth factory-like drivability.

burgertuning.com

Also ripped open the other screen last night, needs a 50 to 40 pin lvds convertor , which I just ordered .. Looks pretty nice the 9" screen.

 

[B21]

Click on the drop box link explains it all in great detail..RTFM!

 

[Vanne]

Hey Pete, just about 3/4 ways to Seattle @fl370, so the mind is a bit dull atm. Where's the drop box link? I'd like to rtfm.