Recent content by grizzle245

managed to fix this, the cable for the exterior door handle was corroded and preventing the latch from resetting resulting in the door being dead locked... so the solution for this is pull the door cad off the left side, you wont get it off as the dash is in the way, remove the airbag unit, keep...

no tamper dot :D so when you pull the needles twist left and pull and they will come away the pain is putting them back in, leave them out of the case, plug them in so you can correct the position

right guys, fixed this you swap the chips over

No none of this worked, I talked to bmw and you have to brake it open by taking out the door card from the inside, oh great, another reason not to give lifts :)

hi guys after charging my battery out of the car the passannger door wont open from the inside or outside handle. really strange the lock pin goes up and down when you unlock/lock it, any ideas or is the car in some sort of delivery mode?

Disa valve common problem, it only gets worse, new one from Germany £120 or get a used one and put the disa valve upgrade. make sure you get one thats got a pronounced lip on the angle side other wise they don't seal right

grr why cant life be simples... so its the 715 bmw job or the tamper dot... i will got with the tamper dot... i have my cluster still at these guys. they said they will try extract the eeprom data and i have to find a donnar.

hi Alan that's for the si model i believe their is an extra display in the middle, according to a parts dealer the used one has to have he same millage, and the problem will be coding this unit to the car i believe its a one time shot to code the cluster?

hi guys i just brought a z4 the other month and the ECU light had been tampered with to pass an mot and the speedo was broken, the issue that was cuasing this light was a broken disa valve and faulty o2 sensors iv fixed these now. so i sent of the cluster to cluster repairs uk and unfortunately...