Z4m Front bearing and Hub assembly x2
- Thread starter Truth
- Start date
- Status
Truth said:
Went to fit these today and it turns out I've been mis sold these by the OP sadly. I offer them up for sale again here. Seller doesn't want to know about a return :?
These are not as pictured in the 1st post and are in fact for a regular Z4 e85/6 not an M.
They certainly don't cost £210 I believe they can be had for about £95 for the pair
Offered for £70 inc postage BNIB
So how much are they worth? Also when did you buy them?
If you’d made me aware when you received them, I would happily accepted the postage costs and refunded you. But it’s been over three months!
I’m sorry you’re not happy but insulting me and calling me names over email isn’t the way. I can post the emails up if you like.
All the best
If you’d made me aware when you received them, I would happily accepted the postage costs and refunded you. But it’s been over three months!
I’m sorry you’re not happy but insulting me and calling me names over email isn’t the way. I can post the emails up if you like.
All the best
I'm not sure it's worth repeating (what I am about to write now) what we have said on email but feel free too. Why would I check that the parts received were as advertised, particularly on something like a wheel bearing? I assumed it wasn't mis sold, clearly that's my stupidity in hindsight. I don't really see what time has to do with it, in 10 years of buying and selling parts on forums I've never been mis sold something nor have I done myself. If I had made a mistake I would rectify it like a decent person would.
It was you that flatly refused to entertain any dialogue saying "goodbye" that resulted in my "knob" response, post up whatever you like, I stand by it.
Anyway, life is too short, I've started another for sale post.
Goodbye
It was you that flatly refused to entertain any dialogue saying "goodbye" that resulted in my "knob" response, post up whatever you like, I stand by it.
Anyway, life is too short, I've started another for sale post.
Goodbye
Well not wanting to refund after it’s been so long I think is fair enough. It’s been three months, and I don’t know you at all so couldn’t say you hadn’t swapped them or otherwise in that time. But please don’t insinuate I’m not a decent person.
Like you say life’s too short.
All the best
Like you say life’s too short.
All the best
Yeah of course because I'd really want to faff around buying new bearings/ exchanging them with yours for the sake of £80 jeesus 
On 28 Apr 2021 19:21, Mark Simpson <[email protected]> wrote:
Yeah that’s not guna happen. It’s been too long mate. No other seller would accept them after so long. I’m afraid. If you’d realised this earlier I may have accepted them out of good faith. Sell them on or keep them.
Good bye
Sent from my iPhone
On 28 Apr 2021, at 19:13, Tom King <[email protected]> wrote:
You advertised them as being Z4M specific, the part numbers are clearly different between the two? Asking me to sell them on when they cost pretty much the same as I paid for them from autodoc is a bit shitty mate.
To be honest I'd prefer to send them back to you and get my money back. FYI they haven't been installed, the differences between them were clearly visible upon inspection.
From: Mark Simpson <[email protected]>
Sent: 28 April 2021 17:56
To: Tom King <[email protected]>
Subject: Re: Z4m hub/bearing
They were stated as Z4m ones when I searched for them and bought them.
Ah well mate. Sure you’ll be able to sell them on, on the forum.
All the best
Sent from my iPhone
On 28 Apr 2021, at 18:14, Tom King <[email protected]> wrote:
Hey Mark,
Bit miffed, finally got round to trying to install those bearings and it turns out they are not for a Z4M as was stated but for a normal Z4/e46.
Thoughts?
Tom
On 28 Apr 2021 19:21, Mark Simpson <[email protected]> wrote:
Yeah that’s not guna happen. It’s been too long mate. No other seller would accept them after so long. I’m afraid. If you’d realised this earlier I may have accepted them out of good faith. Sell them on or keep them.
Good bye
Sent from my iPhone
On 28 Apr 2021, at 19:13, Tom King <[email protected]> wrote:
You advertised them as being Z4M specific, the part numbers are clearly different between the two? Asking me to sell them on when they cost pretty much the same as I paid for them from autodoc is a bit shitty mate.
To be honest I'd prefer to send them back to you and get my money back. FYI they haven't been installed, the differences between them were clearly visible upon inspection.
From: Mark Simpson <[email protected]>
Sent: 28 April 2021 17:56
To: Tom King <[email protected]>
Subject: Re: Z4m hub/bearing
They were stated as Z4m ones when I searched for them and bought them.
Ah well mate. Sure you’ll be able to sell them on, on the forum.
All the best
Sent from my iPhone
On 28 Apr 2021, at 18:14, Tom King <[email protected]> wrote:
Hey Mark,
Bit miffed, finally got round to trying to install those bearings and it turns out they are not for a Z4M as was stated but for a normal Z4/e46.
Thoughts?
Tom
Yes of course, that's exactly what I have to do with my time, go and buy some normal z4 bearings and replace them with what you said you sent me for the sake of £80. Jeez 
Love the way it's like I'm buying from a shop with their returns policy not a normal human being. And 'may' have accepted them out of good faith
On 28 Apr 2021 19:21, Mxxxxxxxxxxxxxxxxxxxx wrote:
Yeah that’s not guna happen. It’s been too long mate. No other seller would accept them after so long. I’m afraid. If you’d realised this earlier I may have accepted them out of good faith. Sell them on or keep them.
Good bye
Sent from my iPhone
On 28 Apr 2021, at 19:13, Tom King <rxxxxxxxxxxxxxm> wrote:
You advertised them as being Z4M specific, the part numbers are clearly different between the two? Asking me to sell them on when they cost pretty much the same as I paid for them from autodoc is a bit shitty mate.
To be honest I'd prefer to send them back to you and get my money back. FYI they haven't been installed, the differences between them were clearly visible upon inspection.
Subject: Re: Z4m hub/bearing
They were stated as Z4m ones when I searched for them and bought them.
Ah well mate. Sure you’ll be able to sell them on, on the forum.
All the best
Sent from my iPhone
On 28 Apr 2021, at 18:14, Tom King <rxxxxxxxxxxxxxxxxm> wrote:
Hey Mark,
Bit miffed, finally got round to trying to install those bearings and it turns out they are not for a Z4M as was stated but for a normal Z4/e46.
Thoughts?
Tom
Love the way it's like I'm buying from a shop with their returns policy not a normal human being. And 'may' have accepted them out of good faith
On 28 Apr 2021 19:21, Mxxxxxxxxxxxxxxxxxxxx wrote:
Yeah that’s not guna happen. It’s been too long mate. No other seller would accept them after so long. I’m afraid. If you’d realised this earlier I may have accepted them out of good faith. Sell them on or keep them.
Good bye
Sent from my iPhone
On 28 Apr 2021, at 19:13, Tom King <rxxxxxxxxxxxxxm> wrote:
You advertised them as being Z4M specific, the part numbers are clearly different between the two? Asking me to sell them on when they cost pretty much the same as I paid for them from autodoc is a bit shitty mate.
To be honest I'd prefer to send them back to you and get my money back. FYI they haven't been installed, the differences between them were clearly visible upon inspection.
Subject: Re: Z4m hub/bearing
They were stated as Z4m ones when I searched for them and bought them.
Ah well mate. Sure you’ll be able to sell them on, on the forum.
All the best
Sent from my iPhone
On 28 Apr 2021, at 18:14, Tom King <rxxxxxxxxxxxxxxxxm> wrote:
Hey Mark,
Bit miffed, finally got round to trying to install those bearings and it turns out they are not for a Z4M as was stated but for a normal Z4/e46.
Thoughts?
Tom
Yes of course, that's exactly what I have to do with my time, go and buy some normal z4 bearings and replace them with what you said you sent me for the sake of £80. Jeez
Love the way it's like I'm buying from a shop with their returns policy not a normal human being. And 'may' have accepted them out of good faith
Let's see your invoice for these from ECP then and the part number, you must have that?
On 28 Apr 2021 19:21, Mxxxxxxxxxxxxxxxxxxxx wrote:
Yeah that’s not guna happen. It’s been too long mate. No other seller would accept them after so long. I’m afraid. If you’d realised this earlier I may have accepted them out of good faith. Sell them on or keep them.
Good bye
Sent from my iPhone
On 28 Apr 2021, at 19:13, Tom King <rxxxxxxxxxxxxxm> wrote:
You advertised them as being Z4M specific, the part numbers are clearly different between the two? Asking me to sell them on when they cost pretty much the same as I paid for them from autodoc is a bit sh***y mate.
To be honest I'd prefer to send them back to you and get my money back. FYI they haven't been installed, the differences between them were clearly visible upon inspection.
Subject: Re: Z4m hub/bearing
They were stated as Z4m ones when I searched for them and bought them.
Ah well mate. Sure you’ll be able to sell them on, on the forum.
All the best
Sent from my iPhone
On 28 Apr 2021, at 18:14, Tom King <rxxxxxxxxxxxxxxxxm> wrote:
Hey Mark,
Bit miffed, finally got round to trying to install those bearings and it turns out they are not for a Z4M as was stated but for a normal Z4/e46.
Thoughts?
Tom
Love the way it's like I'm buying from a shop with their returns policy not a normal human being. And 'may' have accepted them out of good faith
Let's see your invoice for these from ECP then and the part number, you must have that?
Truth said:
On 28 Apr 2021 19:21, Mxxxxxxxxxxxxxxxxxxxx wrote:
Yeah that’s not guna happen. It’s been too long mate. No other seller would accept them after so long. I’m afraid. If you’d realised this earlier I may have accepted them out of good faith. Sell them on or keep them.
Good bye
Sent from my iPhone
On 28 Apr 2021, at 19:13, Tom King <rxxxxxxxxxxxxxm> wrote:
You advertised them as being Z4M specific, the part numbers are clearly different between the two? Asking me to sell them on when they cost pretty much the same as I paid for them from autodoc is a bit sh***y mate.
To be honest I'd prefer to send them back to you and get my money back. FYI they haven't been installed, the differences between them were clearly visible upon inspection.
Subject: Re: Z4m hub/bearing
They were stated as Z4m ones when I searched for them and bought them.
Ah well mate. Sure you’ll be able to sell them on, on the forum.
All the best
Sent from my iPhone
On 28 Apr 2021, at 18:14, Tom King <rxxxxxxxxxxxxxxxxm> wrote:
Hey Mark,
Bit miffed, finally got round to trying to install those bearings and it turns out they are not for a Z4M as was stated but for a normal Z4/e46.
Thoughts?
Tom
So they sold you the incorrect part in 2018 and you decided to pass it on in 2021 having realised. thanks. The fact you said you paid £210 says it all really.
629110250 not 629110010 is the correct ecp part for these. Search z4m https://www.eurocarparts.com/wheel-bearing-and-wheel-hub
The one's you've pictured in your first post don't even look the same as the part number you've given us. Lame
your first post pic below, your part number pic and link to that from ecp below that. Notice the 3 dowels missing and only one disc bolt hole rather than 2 in the z4m version :roll:
https://www.eurocarparts.com/p/fag-wheel-bearing-kit-629110010
629110250 not 629110010 is the correct ecp part for these. Search z4m https://www.eurocarparts.com/wheel-bearing-and-wheel-hub
The one's you've pictured in your first post don't even look the same as the part number you've given us. Lame
your first post pic below, your part number pic and link to that from ecp below that. Notice the 3 dowels missing and only one disc bolt hole rather than 2 in the z4m version :roll:
https://www.eurocarparts.com/p/fag-wheel-bearing-kit-629110010
- Status