Z4M CSL's with spacers.

Arhhh i forgot one thing!!! Et32 is perfect for me due to my 19" 8.5 front rim, it was et 44, i added a 12mm eibach spacer, to allow perfect spacing , poat up your rim specs so i can help. On a front csl a 12mm spacer is perfect!!!
 
I don't have any clearance diagram and I won't be at home until this week-end to have a look to the rims :cry:. The only specs I have are : 8,5x19 ET37 for front and 9,5x19 ET27 for rear.

I own an E30 on which I've also put a BBK, and with different rims which have the same offset, the clearance is not the same, it depends on the rim shape.
Also, a friend had an M3 CSL with the same AP-Racing kit and as far as I remember, he didn't need spacers with the OEM wheels (I'm waiting for confirmation).
So I hope there will have enough clearance to fit the wheels with 5mm (or less) spacers...
 
yes but 5mm spacer is without hubcentric!

10mm or 12mm for have hubcentric on a spacer.

pfff c'est un bordel francophone maintenant ici!! :D
 
:D

Yes that would be better with hubcentric spacers but it seems 12mm will be too much for 8,5x19 ET37... That's why I'm looking for ajustable camber plates but there is no much choice for Z4M :( ...

Edit : I had the confirmation that my friend didn't need to use any spacer with an AP-Racing BBK (6p 356x32mm) on his M3 CSL using OEM rims.
 
exocet said:
:D

Yes that would be better with hubcentric spacers but it seems 12mm will be too much for 8,5x19 ET37... That's why I'm looking for ajustable camber plates but there is no much choice for Z4M :( ...

Edit : I had the confirmation that my friend didn't need to use any spacer with an AP-Racing BBK (6p 356x32mm) on his M3 CSL using OEM rims.
Click to expand...

Ap do a slimline caliper that uses slim pads, i think these are what ur friend has :-)

Even a 10mm spacer for you is way to much so your only choice is a 5mm, whats the width of ur fronts?? The normal ap 6 pot is huge.
 
Front calipers ? I don't know yet because I'm only about to purchase them :D.
Front brake disc width is 32mm. Front rims width is 8,5".
Do you think using 225/40R19 tyres for front combined with camber plates could fit with 12mm spacers ?
 
With camber youll easily tuck those tyres in, hell the us ///m owners are using upto 9.5" upfront with wild camber.

Dial in some camber, use a 10mm spacer and youll be fine. You just wont need 12mm with your offset.
But if u wish too im certain you can tuck those sizes in with a 12mm spacer easily!!
 
E-mailed MAPS Ltd. E-bay company listed above.

£110 for

Set of 15mm rear spacers
x16 wheel nuts
x4 lockers.

Sound about right?
 
I'll enquire guys.

ss1977, issue is you can't split the locking nut sets. I.e you need two long nuts and 2 short, he can't split the sets, so you end up having to buy two sets or if you comfortable, cut the long bolts down to suit?! You're call.

AR
 
Thanks for the update AR.

I've found a chap on the M3 Cutters website offering what I'm after so I'll give him a try, not particularly confident with cutting the bolts down! I only need 2 spacers to increase the offset on the front as I'm running OEM CSLs.

Aliv6 said:
I'll enquire guys.

ss1977, issue is you can't split the locking nut sets. I.e you need two long nuts and 2 short, he can't split the sets, so you end up having to buy two sets or if you comfortable, cut the long bolts down to suit?! You're call.

AR
Click to expand...
 
^ I can get you a set at the above rate mate?

Thats a set of spacers, X4 Lockers, and X16 new bolts all round.
 
You must log in or register to reply here.
Back
Top Bottom