Z4M activated charcoal filter fits a 3.0si ? with M bumper

[Markos_Z4]

you think this wil fit on my Z4 coupe 3.0si with a M bumper?

http://www.realoem.com/bmw/en/showparts?id=DU91-EUR-04-2006-E86-BMW-Z4_M32&diagId=51_4961

my z4 with M rear bumper

 

[srhutch]

Battery tray is going to be in the way I think you’ll find.

 

[Scooba_Steve]

What does it even do?

 

[Markos_Z4]

what can i do. . . build my own i think :? maybe leaving it like that

 

[kis]

what can i do. . . build my own i think :? maybe leaving it like that

Whats your end game? Is it just tying up the new M bumper to the car?

 

[Markos_Z4]

yes i fitted the new M bumper !
i think i have to remove the battery

 

[kis]

I used a cut off from a "standard" bumper on mine. So it ties into the under body of the car like your old bumper did, to those 4 holes highlighted connect to the cut off section.

 

[JINGLE]

I’ve always wondered this, I don’t like how my front bumper is all connected with my //M undertray and splitter... yet my rear bumper isn’t connected at all!!

What do all other people do whose don’t the conversion, just leave it?

 

[Markos_Z4]

I’ve always wondered this, I don’t like how my front bumper is all connected with my //M undertray and splitter... yet my rear bumper isn’t connected at all!!

What do all other people do whose don’t the conversion, just leave it?

when my custom exhaust is finished i think go build something my self

 

[JINGLE]

I’ve always wondered this, I don’t like how my front bumper is all connected with my //M undertray and splitter... yet my rear bumper isn’t connected at all!!

What do all other people do whose don’t the conversion, just leave it?

when my custom exhaust is finished i think go build something my self

Keep me updated with progress please mate

 

[kis]

This is what I did, I appreciate it's not very clear. Theres not much room underneath and phone was literally on the floor!
So like I said, I used a section of an old bumper cut it off and attached it to the 4 holes, then tied it in as normal to that bolt back by the battery box.

 

[Markos_Z4]

thx ! looks great ! abs sheet inside the bumper

This is what I did, I appreciate it's not very clear. Theres not much room underneath and phone was literally on the floor!
So like I said, I used a section of an old bumper cut it off and attached it to the 4 holes, then tied it in as normal to that bolt back by the battery box.
IMG_4014.jpg

 

[Beedub]

What does it even do?

helps clean up air under the car and also appears to be some sort of exhaust outlet for air going thru the diff cooling sections

 

[Scooba_Steve]

But no filter? seems an odd part title!

 

[srhutch]

But no filter? seems an odd part title!

Just the diffuser, the charcoal filter is a separate unit that sits above it.

As you say the title is incorrect.