Z4 breaking
- Thread starter kis
- Start date
Simon 3.2M
Senior member
kis said:Simon 3.2M said:Hi Kis, I'm after the passenger side bumper support bracket. It's the plastic part that the bumper clips into behind the headlight and below the edge of the wing
In fact it's part 21 in the pic
IMG_3479.PNG
I’ll check to see if it’s okay. Is this interchangeable pre and post facelift?
I Kis, left side only and suitable for both pre and facelift cars
ben g all panels have damage. Some of them are quite bad, but then I'm sure there are some that are okay - but would still need work. I recon he would let them go for quite cheap. Is damage okay? To what extent? Would you be pulling? Or just small imperfections and body filler?
oldgitdave passenger one (and drivers) are both damaged. I think they ripped off the front bumper causing damage to a few areas.
1000rr got both for you.
Simon 3.2M both sides were damaged bud. Like above, think they hastily took off the front bumper causing damage.
DaveD cupholders gone.
Chris_D don't think it had one bud.
MalNCH no cupholder or vent for driver side.
PRMG wasn't a ZHP knob, also its a 2.2 I think, so only 5 gears.
Sorry I couldn't be more helpful to some of you. Let me know if you need anything else, can take another look when I'm back to this area in the new year now
oldgitdave passenger one (and drivers) are both damaged. I think they ripped off the front bumper causing damage to a few areas.
1000rr got both for you.
Simon 3.2M both sides were damaged bud. Like above, think they hastily took off the front bumper causing damage.
DaveD cupholders gone.
Chris_D don't think it had one bud.
MalNCH no cupholder or vent for driver side.
PRMG wasn't a ZHP knob, also its a 2.2 I think, so only 5 gears.
Sorry I couldn't be more helpful to some of you. Let me know if you need anything else, can take another look when I'm back to this area in the new year now
[ref]kis[/ref],
Are you likely going near this car again .
Am interested in 2 engine bay parts
The electrical box cover that's on the passenger side near the strut top (with screws)
An the plastic panel that goes between the headlights has a BMW logo in the centre
If both are good condition
Items would need posting
Thanks an don't worry if not going back
Are you likely going near this car again .
Am interested in 2 engine bay parts
The electrical box cover that's on the passenger side near the strut top (with screws)
An the plastic panel that goes between the headlights has a BMW logo in the centre
If both are good condition
Items would need posting
Thanks an don't worry if not going back
markplant said:
I won't be back again till early new year now. As it's near one of our offices so will be going back definitely.
The electric box is replacing a damaged one? It's like the air filter box right? Square and black? The whole thing or just the covers?
The slam panel cover thing, does it need to be mint? If it's broken I'll leave it, but what about scratches?
kis said:oldgitdave passenger one (and drivers) are both damaged. I think they ripped off the front bumper causing damage to a few areas.
Sorry I couldn't be more helpful to some of you. Let me know if you need anything else, can take another look when I'm back to this area in the new year now
No worries & thanks for looking kis, very much appreciated
Simon 3.2M
Senior member
Thanks Kis
cracked ??? pah, mine is missing ! i assume it had the s**t kicked out of it before i bought it.. and your right thats the temp sensor - mine was busted and just hangs down now dangling free ...oldgitdave said:kis said:
Hi kis, I'm after a front passenger side splash guard if you get chance & if it's still there in one piece. Might be easy to get at now the front bumper has gone. I cracked mine right through on a high kerb. They are a bit pricey at the stealers so I will stitch mine if I can't get one at a reasonable price. Part No. is 51717012725 & here's a pic of mine. Looks like the air temperature sensor is housed here. Thanks in advance
Dave
20181004_104057.jpg
kis said:
Cup holders?
Thunderous One said:
Nah someone asked before as well. They’re gone.
Worth me saying that bits and bobs may not be brilliant but will be good to replace anything broken. I wouldn’t categorise things I’ve seen as mint. Bit of TLC and they’ll come out fine.
really appreciate your return commentkis said:
Thanks mate
Kindest regards, James