Xenon headlight internals

S

Striven

Member
Hi,
Drivers side headlight connectors rotted . I have a new one on order but stripped the old one out of interest.
Anyone need intervals, self levelling motor etc. Drop me a message.
 

Attachments

  • 585F8CB2-01B8-468D-B761-05EB3550D0DE.jpeg
    585F8CB2-01B8-468D-B761-05EB3550D0DE.jpeg
    111.9 KB · Views: 760
  • A0932F7D-469E-44FB-BD41-54F9024AB2A3.jpeg
    A0932F7D-469E-44FB-BD41-54F9024AB2A3.jpeg
    150.5 KB · Views: 760
  • B2387279-8CB7-4631-97AE-E625B4D1BDEA.jpeg
    B2387279-8CB7-4631-97AE-E625B4D1BDEA.jpeg
    100 KB · Views: 760
  • 670BCA1B-5ED2-46ED-800B-D03ACCD8A58D.jpeg
    670BCA1B-5ED2-46ED-800B-D03ACCD8A58D.jpeg
    104.5 KB · Views: 760
Hi
Unfortunately you can't put pictures on PMs, as I found out, you could put pictures on this thread and I'll send you a PM as well.
George
 
Striven said:
It is the drivers side lamp but I have both out, if it is common I could send it to you .
Click to expand...

Ok thanks. Needs to be intact with the black cap/cog at the end if possible, not like mine where it’s worked its way loose.
Thx
 
Hi,
Got the cable off and it is universal however I am unsure how you will get the other end to locate , I am unsure if the black gear can be removed from the adjuster screw. Will have a look later , what’s the worst that can happen , at least if I break something it is no loss
 

Attachments

  • E9EF4F54-9A7C-436A-A761-9C345228A4E0.jpeg
    E9EF4F54-9A7C-436A-A761-9C345228A4E0.jpeg
    148.2 KB · Views: 634
Striven said:
Hi,
Got the cable off and it is universal however I am unsure how you will get the other end to locate , I am unsure if the black gear can be removed from the adjuster screw. Will have a look later , what’s the worst that can happen , at least if I break something it is no loss
Click to expand...
Nice one. I should be able to wangle it in somehow. The non-adjuster end slots into a reciprocal cog in a housing at the headlight. You can see the cover in the background in my pic.
PM me how much you want for it plus postage to the Netherlands please fella.
:thumbsup:
 
Stuart
The black gear wheel I would like should pull off. The shaft it sits on is knurled to grip the adjuster.
George
 
Striven said:
I am unsure if the black gear can be removed from the adjuster screw.
Click to expand...

Would be interested to know how you get on with the removal of the 'black adjuster' piece. I want to remove one from my broken headlight but it doesn't want to budge! I want to re-use both the adjuster and the metal screw so let me know how you get on please? :)
 
Well I want to port this (the one on the broken light) over to another light I have... but that screw seems different.

The metal screw is quite smooth so seems like it should pull off easily. So clearly some sort of production issue... otherwise it wouldn't have fallen off in the first place!
 
Got the parts for our two members, these should be what you are looking for
 

Attachments

  • 40D2D8A0-4A5E-4224-B624-ED21CCD0BB9E.jpeg
    40D2D8A0-4A5E-4224-B624-ED21CCD0BB9E.jpeg
    148.2 KB · Views: 318
  • C07646A2-7E26-4436-AE4D-88EFC4820C2A.jpeg
    C07646A2-7E26-4436-AE4D-88EFC4820C2A.jpeg
    144.9 KB · Views: 318
Striven said:
Got the parts for our two members, these should be what you are looking for

file.jpg
Click to expand...

Did you pull the black part off then attach it to the screw again?
As ridiculous as it sounds I might punch the screw and drill it out! Out of the two you can at least replace the screw!
 
I'd be interested in the projector to try and find an OEM upgrade/replacement for the originals without going down the morimoto route, unless someone needs it to replace a bust one.
 
Stuart
I require the parts in the top picture desperately, I'll pm you with details for posting please

George
 
You must log in or register to reply here.
Back
Top Bottom