WTD. Third brake light ( RED )

H

holeshot

Member
 Kent
Chaps,

As title, if anyone has replaced theirs with the clear one I'd be interested in your red one as mine has the standard broken corners.

Cheers
 
mine fell out last cold winter lens only,bought new one had to be whole unit from euro-parts,two nuts and away you go they sell both clear and red. :)
 
Mine is chipped at the corners too.

Anyone got a link the part numbers of the light, nuts and new springs etc please?
 
Tino, had a search on euro-parts web site but found nothing, I'll give them a bell tomorrow.

Mrdo, seriously, but here you go..............

http://www.realoem.com/bmw/showparts.do?model=BT12&mospid=47795&btnr=63_0762&hg=63&fg=25
 
When you replace it get the softer compression springs if yours is a pre-2007 model ( think that's the right year ). If you check realoem you should be able to get the part number.
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=13662
 
Richard! said:
When you replace it get the softer compression springs if yours is a pre-2007 model ( think that's the right year ). If you check realoem you should be able to get the part number.
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=13662
Click to expand...


Yes, there was a spring change. Or don't tighten the nuts up too much...
 
You must log in or register to reply here.
Back
Top Bottom