WTB Z4M Passenger side Wheel Arch Liner

P

pixelloft

Member
Hi Guys,
If anyone has a z4m Passenger side wheel arch liner they want to find a new home for, mine has worn through, and the stealer wants crazy money.
Thanks. Nick
 
you might want to specify front or rear?

also a quick side note, are Z4M arch liners any diff to standard? front arch liners for the fog light access flap on standard and the z4m air duct?
 
AFAIK the arch liners are the same on the front, the air duct fits into the access panel hole. Though because of the way it's all put together you may need to take the front bumper off.

Unfortunately these are like rocking horse s**t, but try some breakers. And do not buy the 'pattern part' replacements from eBay - I don't have personal experience but others on here have said they're not a great fit.
 
i have a M sport bumper on mine and it already has the air ducts and brackets. i replaced the front left arch liner and it was a mission fitting the air duct piece through but managed it but wasn't sure if there was a special "M" version was all.

sorry for the thread hi-jack OP :driving:
 
Rocking horse poo mate. I waited months and snapped one up on eBay for my M £35. £140 from dealers worst case. Stick an enquiry on www.parts gateway.co.uk. They then send the enquiry to every breaker in the UK. Most of my M has come off there
 
In fairness, parts gateway are pretty good, I used them a lot for bits for my last Z :thumbsup:
 
Thanks for all the feedback. It looks like i can get away with a standard 3.0SI liner, I just made a post to verify with anyone that has done the mod.

If anyone has a standard 3.0SI liner, let me know. Thanks for the heads up on the aftermarket ones. I've tried all the breakers and nothing, not even for a standard 06.

Cheers, Nick
 
Just confirmed that the standard ones are fine so just opened a new thread for a standard one, maybe someone will have one lying around.
It's front passenger side.

Cheers
 
You must log in or register to reply here.
Back
Top Bottom