Wires Front bumper area?

Anybody know off hand about the wiring by drivers side fog light! My fog light is connected but in the same loom directly behind fog light I found 2 wires with blue factory look spade connectors (not the usual halfords ones) just dangling in the breeze? I've not properly looked yet , but all I can think is temp probe or horn?? The wires have a half moon shape grommit on also if that helps??
 
Try a search of the site - there's a photo of the temp sensor along with a similar question - might just be the same thing!

A quick search and try these threads

https://z4-forum.com/forum/viewtopic.php?f=2&t=104565&p=1524600&hilit=air+temp+sensor#p1524600
https://z4-forum.com/forum/viewtopic.php?f=3&t=108947&p=1576300&hilit=air+temp+sensor#p1576300
 
Thanks guys, Good posts and links, I will have a proper look under side and try to see anything missing. Pretty sure my Temp Outside is reading on dash, so assume not from that. Could be the horn on right side as car had a small front damage when bought it. :?
 
Sidewaze Samm said:
Temp sensor is on passenger (left) side. Should be a horn on each side.
This^ The horns have a push bayonet connector as in this photo so if blue spade connectors are present then they've been altered or they are for something else :thumbsup: 20190709_203546.jpg
 
Not sure if the Z4 is the same, but on my E46 there was a temperature sensor for the heated washer jets in that area.
 
I need to take bumper off anyway (Front grille needs securing and Headlight condensated badly) So will have to invest further, many thanks guys for quick replies. Great forum :D
 
Back
Top Bottom