damian0797
New member
I've had the same. The problem with mine was... one end of the spring hooks over the pivot pin in the arm. Over time it has wandered to one end, this has put the body of the spring against the inner side of the arm. So when it extends and contracts it scratches on the arm, reverberates down the blade and then is amplified by the windscreen.
Solution: a squire of WD (be careful where it goes, you don't want it on the blade or screen) and lever the spring back to the centre of the pivot.
£70 Saved - lesson learnt!
Solution: a squire of WD (be careful where it goes, you don't want it on the blade or screen) and lever the spring back to the centre of the pivot.
£70 Saved - lesson learnt!