Wing repeater badges

[mad4slalom]

Hi all, my wing repeater roundalls are getting a little edgy, anyone replaced them? Do you go for just the badges ore replace the whole lamp as a unit, also oem or ebay/ amazon ? Ideas of prices , any recommendations appreciated.

 

[crustyclown777]

I replaced one of mine recently. Used a credit card to separate the badge from the lamp and removing the excess tape. Pretty straight forward process.
Purchased an OEM one to replace it with.

 

[ErrErrminator]

I bought a couple of 82mm bonnet/boot badges, ten pound for the pair from eBay. Just cut off the locating pins on the back and secure with silicone, or other suitable adhesive. Perfect fit.

 

[mad4slalom]

I bought a couple of 82mm bonnet/boot badges, ten pound for the pair from eBay. Just cut off the locating pins on the back and secure with silicone, or other suitable adhesive. Perfect fit.

Ok, thanks did you remove old badge first or stick on top ?

 

[mad4slalom]

I replaced one of mine recently. Used a credit card to separate the badge from the lamp and removing the excess tape. Pretty straight forward process.
Purchased an OEM one to replace it with.

thanks for that.

 

[ErrErrminator]

Ok, thanks did you remove old badge first or stick on top ?

I fitted mine to new repeaters, but you will definitely need to remove the old badges first. Use a blunt knife and slowly work it in underneath the badge and ease it up carefully.