Windscreen Washer Jets - Different Levels

Hi,

I have a rather strange issue. My washer jets are spraying water at different levels. The drivers side is spraying about half an inch lower. There is pressure but the spray is not reaching as high as on the passenger side.

I've had the filter in the washer fluid reservoir cleaned.

Any advice on how to resolve the issue would be much appreciated!

Many thanks in advance!
 
You can sometimes adjust the height as i think Oakandacorns, was alluding to.

You'd do this by just sticking a pin in the nozzle and moving it up/down.

Will probably be a bit stiff and not entirely sure you can on the Z
 
Back
Top Bottom