Wilwood 4 pot brake conversion FITTED

OK no more puppie jokes

The brake conversion has been done

Initial feeling is much better but too early to tell while bedding in

Overall no fitting problems at all
however the disc size I was told to buy I think is a little too large (325mm) and the caliper only covers approx 75% of the disc
so I may look for some smaller discs to reduce by around 10mm or so

This was a real sensible cost conversion and looks so much better under the 19's

IMG_1064.jpg


IMG_1063.jpg


IMG_1062.jpg


IMG_1061.jpg


IMG_1060.jpg


IMG_1065.jpg


IMG_1058.jpg


IMG_1057.jpg


IMG_1056.jpg


IMG_1059.jpg
 
The discs are 325x25

They are alot larger than the standard discs but the 19 wheels have a big inner radius so it would have to be a really massive disc to fill the wheel

This kit is 1/3 price of the AP kit - again to clarify 1/3 of the price :)

There is also a 6 pot version available
 
@ 1/3 this is a bargain imo...... this is more than enough for the non///m power outputs, great purchase, well done!!
i can however confirm the APs are gigantic in every single way.... playalistic when you have one of those calipers in your hand you simply will not believe it.....
 
Can you go quick enough on are roads that you need stoppers that good ,or are you a track guy????
 
Back
Top Bottom