Will these wheels fit

C

crabbes

Member
 Rugby. Warwickshire
Hi all

Would anyone know if the below wheel and tyres will fit my e89 3.0 auto 2010 reg currently on 19" rims.

I have been looking to change mine for a while but have no idea when it comes to wheel sizes and tyres, sizes below.

This set of genuine 18” Bmw alloys are in immaculate condition with no marks/scratches/cracks/welds

Front wheels:

ET34
8J

Part Number: [hidden information]

Front tyres: 225/45/18 Bridgestone

Rear wheels

ET47
8.5 J

Rear Tyres: 255/40/18



Thanks
 
The fronts will poke a further 13.0 mm @ 8 x 18, ET34 vs 8 x 18, ET47
The rears will poke out a further 3.0 mm @ 8.5 x 18, ET47 V8 8.5 x 18, ET50

Rubbing on the front might be an issue as the profiles are both up one division fronts are 45 vs 40 and rears 40 vs 35

Have a look here https://www.willtheyfit.com/
 
sars said:
The fronts will poke a further 13.0 mm @ 8 x 18, ET34 vs 8 x 18, ET47
The rears will poke out a further 3.0 mm @ 8.5 x 18, ET47 V8 8.5 x 18, ET50

Rubbing on the front might be an issue as the profiles are both up one division fronts are 45 vs 40 and rears 40 vs 35

Have a look here https://www.willtheyfit.com/
Click to expand...
This post is in the E89 section, and I think you've quoted standard E85 ETs?
 
crabbes said:
Thanks for this information Sars :thumbsup:
Click to expand...
Duh, Brain fart, I gave you the offsets for the e85 :headbang:
Sorry [ref]crabbes[/ref], for the e89 standard offsets are front ET29 and rears ET40
General rule of thumb is that +/-5 on offset is okay without the need for spacers, the tyres are still up a size profile
 
The front will definitely be ok back may foul just, unlikely …but both will be a bit in board…need 5mm spacers to bring them into line with OE spec…
 
You must log in or register to reply here.
Back
Top Bottom