Which torque wrench . . .

Marlon

Lifer
 Lancs.
Can anyone recommend a good torque wrench, there are massive price differences out there? At some point I will want to remove my wheels and although the wheel brace will obviously do the job, when it comes to putting them back on I want to do it right.
 
Is that all you want to do with it? As the wheels are 140 nm, buy one that covers 100 - 200 nm or so, not one that goes from 20 - 200 as the wide range is no good.
 
pvr said:
Is that all you want to do with it? As the wheels are 140 nm, buy one that covers 100 - 200 nm or so, not one that goes from 20 - 200 as the wide range is no good.

Cheers pvr, yes that is all I will be using it for.
 
I have two Roebucks for the various ranges and they are about £100 each. Think Halfords Prof series have a good review as well.
 
+1 on the Halfords pro wrenches - they have a lifetime guarantee (as long as you keep the receipt) so, if you see one for sale on't FleaBay make sure it includes the receipt
 
Always remember to store a torque wrench loosened off and untensioned or you'll find that it'll be out of whack very quickly

For removing wheel nuts, especially stubborn ones, a 1/2" square drive breaker bar is worthwhile - you can pick up 750mm ones for about £14 and the extra leverage they offer makes life very easy
 
pvr said:
....As the wheels are 140 nm.....
Erm, does your X5 use 14mm bolts by any chance? The BMW spec for 14mm bolts is 140Nm +/-10Nm

BMW spec for 12mm bolts (as on the E85/86) is 120Nm (88lbft) +/-10Nm you don't want to overtighten them as they'll stretch and weaken
 
JINGLE said:
i noticed that ^^ i only done mine to 120Nm and was worried when he said 140Nm :/
It's fairly easy to remember as, for the common wheel bolt sizes, BMW now tend to spec (Bolt Diameter x 10)Nm +/- 10Nm

That said, as BMW only seem to use 12mm & 14mm bolts, you should be able to use 130Nm for any BMW and still be within spec
 
Back
Top Bottom