Which setup is a better fit?

welsh

Member
Hi

I've found the set of wheels i've been after for ages and it's a straight choice between these two setups:

Setup A - 8" x 19" ET34 (fronts), 9" x 19" ET37 (rears)
Setup B - 8.5" x 19" ET37 (fronts), 9.5" x 19" ET37 (rears)

Going on what GP20 has said in the past, it looks like both setups should fit fine, but my guess is Setup A might look a bit better because the rear extrusion is more closely matched to the fronts.

Any thoughts?
 
I have 8.5x19 (et35mm) on the front of mine fitted with 235/35/19 tyres and 9.5x19 (et40mm) with 265/30/19's on the back and they look perfect

J.
 
Can I ask if you have any rubbing issues with that setup?

And from your response I take it you would go for Setup B...?

Thanks for the comment :)
 
marriedblonde said:
I have 8.5x19 (et35mm) on the front of mine fitted with 235/35/19 tyres and 9.5x19 (et40mm) with 265/30/19's on the back and they look perfect

J.


any pic plz will be good thanks allot as i have the same issue any lower springs have you installed or not and if yes any pro occured or not ?
 
welsh said:
Can I ask if you have any rubbing issues with that setup?

And from your response I take it you would go for Setup B...?

Thanks for the comment :)

Sorry yes I would go for setup B and no issues with rubbing.

J.
 
z200 said:
marriedblonde said:
I have 8.5x19 (et35mm) on the front of mine fitted with 235/35/19 tyres and 9.5x19 (et40mm) with 265/30/19's on the back and they look perfect

J.


any pic plz will be good thanks allot as i have the same issue any lower springs have you installed or not and if yes any pro occured or not ?

Not problem. The cars not lowered at the moment but it is on the cards to be done.

J.

Newheelsfront.jpg

Newheelsfront.jpg

Newheelsrear.jpg

Newheelsside.jpg
 
Back
Top Bottom