Where to get cruise control fitted . . . suggestions?

P

paulgs1000

Elite
 Newcastle upon Tyne
Going to need cruise this season so want to get it fitted (from what I've read my 2006 wont have the plug in loom option so will need a bit more fitting) - preferably by someone/somewhere they've done it before.

I'm based in Newcastle upon Tyne - anyone have any suggestions? Cheers.
 
Not as easy as a non ///M at all Paul.

I've yet to try as I think I have all the information, but you'll need to find an indi who knows how to do it.
 
srhutch said:
Not as easy as a non ///M at all Paul.

I've yet to try as I think I have all the information, but you'll need to find an indi who knows how to do it.
Click to expand...

Thought that might be the case - wonder if anyone knows an indi somewhere in travelling distance?
 
not too far for you...

Prestige German Cars http://www.prestige-german-cars.co.uk/

Noting my local dealer wanted to void the warranty claim on an o2 sensor a couple of months after fitting of cruise at prestige and then charged me the thick end of £80 to rectify and make good the wiring in the DME where "someone" had spliced "something" in to the loom leaving bare soldered wires!!

Otherwise fine!
 
chrissrush said:
not too far for you...

Prestige German Cars http://www.prestige-german-cars.co.uk/

Noting my local dealer wanted to void the warranty claim on an o2 sensor a couple of months after fitting of cruise at prestige and then charged me the thick end of £80 to rectify and make good the wiring in the DME where "someone" had spliced "something" in to the loom leaving bare soldered wires!!

Otherwise fine!
Click to expand...

Looks promising chris - but that fitment :cry: I've read the 'how to' posts on the forum and seen basically what's needed - would hope for better than bare soldered wires . . . hmm.
 
wonder if redish motorsport would do this for you?? when the wiring starts to get messed with it needs to be done to a very high standard.
 
geordie_zed said:
Did you find someone near Newcastle?
Click to expand...

I fitted it myself using the instructions available in this forum
If doing it again I would buy one of srhutch's looms.
 
You must log in or register to reply here.
Back
Top Bottom