Wheels

[Z450]

Sorry for this as it's probably been asked before, Mr Wilks maybe able to hrlp, I'm looking at some used wheels and just want to check if they will fit, here is the description:

BMW CSL "STYLE" 19" STAGGERED ALLOY WHEELS, WIDER REARS
STUD DIAMETER/PCD 5X120
FRONT WHEELS 225 40 19 CONTINENTAL 7MM TYRES, WIDTH 8.5J - OFFSET ET 35
REAR WHEELS 255 35 19 BRIDGE STONE 6.5MM TYRES, WIDTH 9.5J - OFFSET ET 27

Thank you

 

[goldbcfc]

http://www.wheel-size.com/calc/?wheel1=235-40-19X8.5ET50&wheel2=265-35-19X10ET38&fcl=50mm&wcl=30mm&scl=50mm

http://www.rimstyle.com/

 

[mr wilks]

Sorry for this as it's probably been asked before, Mr Wilks maybe able to hrlp, I'm looking at some used wheels and just want to check if they will fit, here is the description:

BMW CSL "STYLE" 19" STAGGERED ALLOY WHEELS, WIDER REARS
STUD DIAMETER/PCD 5X120
FRONT WHEELS 225 40 19 CONTINENTAL 7MM TYRES, WIDTH 8.5J - OFFSET ET 35
REAR WHEELS 255 35 19 BRIDGE STONE 6.5MM TYRES, WIDTH 9.5J - OFFSET ET 27

Thank you

E89 would be a fit but non M 85/86 the rear is not really a goer pretty much like adding a 35mm spacer to 108,s or Mv2s

 

[Z450]

Sorry for this as it's probably been asked before, Mr Wilks maybe able to hrlp, I'm looking at some used wheels and just want to check if they will fit, here is the description:

BMW CSL "STYLE" 19" STAGGERED ALLOY WHEELS, WIDER REARS
STUD DIAMETER/PCD 5X120
FRONT WHEELS 225 40 19 CONTINENTAL 7MM TYRES, WIDTH 8.5J - OFFSET ET 35
REAR WHEELS 255 35 19 BRIDGE STONE 6.5MM TYRES, WIDTH 9.5J - OFFSET ET 27

Thank you

E89 would be a fit but non M 85/86 the rear is not really a goer pretty much like adding a 35mm spacer to 108,s or Mv2s

Thank you for your reply.

That is good to know, I am going to have to have a read up on exactly what does and does not fit before making a mistake!!

 

[mr wilks]

Sorry for this as it's probably been asked before, Mr Wilks maybe able to hrlp, I'm looking at some used wheels and just want to check if they will fit, here is the description:

BMW CSL "STYLE" 19" STAGGERED ALLOY WHEELS, WIDER REARS
STUD DIAMETER/PCD 5X120
FRONT WHEELS 225 40 19 CONTINENTAL 7MM TYRES, WIDTH 8.5J - OFFSET ET 35
REAR WHEELS 255 35 19 BRIDGE STONE 6.5MM TYRES, WIDTH 9.5J - OFFSET ET 27

Thank you

E89 would be a fit but non M 85/86 the rear is not really a goer pretty much like adding a 35mm spacer to 108,s or Mv2s

Thank you for your reply.

That is good to know, I am going to have to have a read up on exactly what does and does not fit before making a mistake!!

In broad terms stick between 8j & 9.5j widths & look for front offset around 40 & rear ideally between 35-42

 

[Z450]

Hi Mr Wilks, thank you for your reply, I really appreciate it.

I am also looking at a used st of 18inch CSL Alloy wheels, 5x12 staggered fittment, front 8.5j rear 9.5j, front tyres are falken 453, 225/40/18, and rear falken 245/35/18, I assume these would fit?

 

[mr wilks]

Hi Mr Wilks, thank you for your reply, I really appreciate it.

I am also looking at a used st of 18inch CSL Alloy wheels, 5x12 staggered fittment, front 8.5j rear 9.5j, front tyres are falken 453, 225/40/18, and rear falken 245/35/18, I assume these would fit?

Depends on the offsets & the tyre widths seem a little stretched on those rim widths ?

 

[Z450]

I Will find out the offsets!

 

[goldbcfc]

I did post a link earlier but here's another I use to know what fits. Oem fitment will be 8j Et47 and 8.5j et50 so put the values in for new alloys it will tell u clearance. The lower the ET number the more they will be pushed out. If you use the other link I posted above that's more in depth you can play about with tyre sizes to try and keep your rolling radius the same as oem which is important. Many will tell you things don't fit but if you know what your doing you can go as low as Et10 I've seen on some z4 and have great stance. Just play around with the link and see what works remember if you clearance is to narrow you can use spacers this will also lower ET offset

http://www.1010tires.com/Tools/Wheel-Offset-Calculator#

 

[Z450]

I did post a link earlier but here's another I use to know what fits. Oem fitment will be 8j Et47 and 8.5j et50 so put the values in for new alloys it will tell u clearance. The lower the ET number the more they will be pushed out. If you use the other link I posted above that's more in depth you can play about with tyre sizes to try and keep your rolling radius the same as oem which is important. Many will tell you things don't fit but if you know what your doing you can go as low as Et10 I've seen on some z4 and have great stance. Just play around with the link and see what works remember if you clearance is to narrow you can use spacers this will also lower ET offset

http://www.1010tires.com/Tools/Wheel-Offset-Calculator#

Hi Goldbcfc, sorry, I missed this, thank you for the link I will have a look into this!

Thank you for the replies Chaps

 

[synthedup]

Sorry for this as it's probably been asked before, Mr Wilks maybe able to hrlp, I'm looking at some used wheels and just want to check if they will fit, here is the description:

BMW CSL "STYLE" 19" STAGGERED ALLOY WHEELS, WIDER REARS
STUD DIAMETER/PCD 5X120
FRONT WHEELS 225 40 19 CONTINENTAL 7MM TYRES, WIDTH 8.5J - OFFSET ET 35
REAR WHEELS 255 35 19 BRIDGE STONE 6.5MM TYRES, WIDTH 9.5J - OFFSET ET 27

Thank you

That's the sizes i am running on my 19" CLS reps, I was running H&R springs with a 35mm drop and it rubbed on the rear and front. I have since lifted the stance on coil-overs and get no rubbing. Also running 1.5 neg camber on the rears to tuck under the arch

 

[goldbcfc]

Sorry for this as it's probably been asked before, Mr Wilks maybe able to hrlp, I'm looking at some used wheels and just want to check if they will fit, here is the description:

BMW CSL "STYLE" 19" STAGGERED ALLOY WHEELS, WIDER REARS
STUD DIAMETER/PCD 5X120
FRONT WHEELS 225 40 19 CONTINENTAL 7MM TYRES, WIDTH 8.5J - OFFSET ET 35
REAR WHEELS 255 35 19 BRIDGE STONE 6.5MM TYRES, WIDTH 9.5J - OFFSET ET 27

Thank you

E89 would be a fit but non M 85/86 the rear is not really a goer pretty much like adding a 35mm spacer to 108,s or Mv2s

Thank you for your reply.

That is good to know, I am going to have to have a read up on exactly what does and does not fit before making a mistake!!

I'm selling my z4 could be up for sale or deal swap on my alloys.

http://www.z4-forum.com/forum/viewtopic.php?f=2&t=87262

Nearly 1 year old with new tyres got them sep 2015 cost me almost £2000 their not cheap reps like a lot fit to theirs they are genuine Beyern alloys they only make bmw alloys

Got hem form here in 19" £1350 plus tyres was £1900
http://www.rimstyle.com/alloywheels/selection/?car_model_id=227&manu=beyern&wheel=Mesh&year=2003

http://www.beyernwheels.com/

 

[Z450]

Hi Mr Wilks, thank you for your reply, I really appreciate it.

I am also looking at a used st of 18inch CSL Alloy wheels, 5x12 staggered fittment, front 8.5j rear 9.5j, front tyres are falken 453, 225/40/18, and rear falken 245/35/18, I assume these would fit?

Depends on the offsets & the tyre widths seem a little stretched on those rim widths ?

I have spoken to the chap and he says the wheels are 8.0 and 9.0 wide and are ETA 40 all around!

 

[Z450]

E89 would be a fit but non M 85/86 the rear is not really a goer pretty much like adding a 35mm spacer to 108,s or Mv2s

Thank you for your reply.

That is good to know, I am going to have to have a read up on exactly what does and does not fit before making a mistake!!

I'm selling my z4 could be up for sale or deal swap on my alloys.

http://www.z4-forum.com/forum/viewtopic.php?f=2&t=87262

Nearly 1 year old with new tyres got them sep 2015 cost me almost £2000 their not cheap reps like a lot fit to theirs they are genuine Beyern alloys they only make bmw alloys

Got hem form here in 19" £1350 plus tyres was £1900
http://www.rimstyle.com/alloywheels/selection/?car_model_id=227&manu=beyern&wheel=Mesh&year=2003

http://www.beyernwheels.com/

Your wheels are lovely but they are more than i have to budget for sadly!

 

[mr wilks]

Hi Mr Wilks, thank you for your reply, I really appreciate it.

I am also looking at a used st of 18inch CSL Alloy wheels, 5x12 staggered fittment, front 8.5j rear 9.5j, front tyres are falken 453, 225/40/18, and rear falken 245/35/18, I assume these would fit?

Depends on the offsets & the tyre widths seem a little stretched on those rim widths ?

I have spoken to the chap and he says the wheels are 8.0 and 9.0 wide and are ETA 40 all around!

Sounds a perfect set if £ is right

 

[Z450]

Depends on the offsets & the tyre widths seem a little stretched on those rim widths ?

I have spoken to the chap and he says the wheels are 8.0 and 9.0 wide and are ETA 40 all around!

Sounds a perfect set if £ is right

Well £395, rear tyres are falkens 453 3mm and a
Nankang with 3mm fronts are both falkens with 6mm, wheels are in good condition, do you think that's a fair price?

 

[mr wilks]

I have spoken to the chap and he says the wheels are 8.0 and 9.0 wide and are ETA 40 all around!

Sounds a perfect set if £ is right

Well £395, rear tyres are falkens 453 3mm and a
Nankang with 3mm fronts are both falkens with 6mm, wheels are in good condition, do you think that's a fair price?

Would need to see some pics to comment on value , have you looked at new sets on CMwheels / BMautosport then get some part worns fitted ? My hunch is you would have a better set for £100/£150 more :wink:

 

[Z450]

Sounds a perfect set if £ is right

Well £395, rear tyres are falkens 453 3mm and a
Nankang with 3mm fronts are both falkens with 6mm, wheels are in good condition, do you think that's a fair price?

Would need to see some pics to comment on value , have you looked at new sets on CMwheels / BMautosport then get some part worns fitted ? My hunch is you would have a better set for £100/£150 more :wink:

Well I was going to send you the link to the wheels but it appears I have missed out on them, as the item as now ended!

I have not looked on CM wheels sounds like a good
Idea!