Wheel spacers on my E89

Tinker15

Active member
 Holmfirth, West Yorkshire
I’m having new 19inch Riva DTM wheels https://www.lkperformance.co.uk/wheels/riva/395-dtm-hyper-silver?vehicle=1641&front=19x8.0&rear=19x9.0#tyre_brand%5B%5D=121&allround=&fronttyres=&reartyres=&b8id=&wheelid=6186&rearwheelid=6190&addtpms=true fitted to my E89 this week, they are 8inch front (offset 34) and 9inch rears (offset 37) fitted with 225/35/R19 and 255/30/R19 tyres. Will these wheels look better with spacers and if so what size is recommended for front and rear? Thank you for any advice offered.
 
You won't need spacers on the rear with above set up , front possibly a 5mm but doubt you will find that a necessity
 
Many thanks for your reply. The wheels are being fitted on Wednesday so after your advice I will just wait and see how they look. 5mm seems hardly worth bothering about.
 
Tinker15 said:
Many thanks for your reply. The wheels are being fitted on Wednesday so after your advice I will just wait and see how they look. 5mm seems hardly worth bothering about.

Well i wouldn't mind 5mm of £50 notes :oops: but yea its pretty small but with wheel widths & offsets you don't need much to swing from perfection to rub or from a good stance to underwheeled :cry: as you say have them fitted then post some pics up , you will know soon enough :P
 
I had my new wheels fitted this morning so a few photographs below. I’m very happy with the way they look and won’t be bothering with any spacers! :D
 

Attachments

  • 7BE01DFA-1612-4BF2-926E-7AB081A781E8.jpeg
    7BE01DFA-1612-4BF2-926E-7AB081A781E8.jpeg
    433.7 KB · Views: 4,113
  • CE958B25-7D1D-4BF2-808A-915C3AF8CF93.jpeg
    CE958B25-7D1D-4BF2-808A-915C3AF8CF93.jpeg
    431.9 KB · Views: 4,113
  • 0A8237B4-BB98-43FC-898B-D21DD575E8C7.jpeg
    0A8237B4-BB98-43FC-898B-D21DD575E8C7.jpeg
    438.5 KB · Views: 4,113
They look good on your car. What size spacers did you use? My car has standard suspension and as you can see from the not very good photos (taken in the garage) the rear doesn’t look as though it could take a spacer and the front doesn’t appear to have much room.
 

Attachments

  • 7799EB1C-DA9B-444D-B06D-18B80D141A12.jpeg
    7799EB1C-DA9B-444D-B06D-18B80D141A12.jpeg
    344.9 KB · Views: 4,071
  • CB6DF755-2AC5-40A1-8260-6937D2788F9C.jpeg
    CB6DF755-2AC5-40A1-8260-6937D2788F9C.jpeg
    360.4 KB · Views: 4,071
DibbleCorse said:
Mine on Eibachs and with spacers ....

ohMRcYoID2SaGVIO3S3wwTpE4OvwdGGJCN=w2060-h1544-tmp.jpg

I'm possibly thinking of new csl rep wheels for my Silver e89. What width rims / offsets and spacers did you buy. I was hoping to buy with an offset to already space the wheels out a bit.
Any advise would be much appreciated :thumbsup:
 
Jollyjoiner said:
DibbleCorse said:
Mine on Eibachs and with spacers ....

ohMRcYoID2SaGVIO3S3wwTpE4OvwdGGJCN=w2060-h1544-tmp.jpg

I'm possibly thinking of new csl rep wheels for my Silver e89. What width rims / offsets and spacers did you buy. I was hoping to buy with an offset to already space the wheels out a bit.
Any advise would be much appreciated :thumbsup:


Sorry mate not been in for a while, they are the Riva DTM Wheels, these ones ... https://www.bmautosport.co.uk/showroom/product_info.php/new-riva-dtm-csl-alloy-wheels-silver-deep-concave-wide-rear-p-422

I didn't buy them from there mine came from Elite Tyres in Reading, if you call and speak to Chris he will know the space widths as I cant recall.
 
DibbleCorse said:
Jollyjoiner said:
DibbleCorse said:
Mine on Eibachs and with spacers ....

ohMRcYoID2SaGVIO3S3wwTpE4OvwdGGJCN=w2060-h1544-tmp.jpg

I'm possibly thinking of new csl rep wheels for my Silver e89. What width rims / offsets and spacers did you buy. I was hoping to buy with an offset to already space the wheels out a bit.
Any advise would be much appreciated :thumbsup:


Sorry mate not been in for a while, they are the Riva DTM Wheels, these ones ... https://www.bmautosport.co.uk/showroom/product_info.php/new-riva-dtm-csl-alloy-wheels-silver-deep-concave-wide-rear-p-422

I didn't buy them from there mine came from Elite Tyres in Reading, if you call and speak to Chris he will know the space widths as I cant recall.

Thanks for that. They are the ones I'm looking at. Same ones that cm wheels sells also. After some searching I can now see that the rears will stick out another 3mm and the fronts in 5mm so they fronts would need a 5mm spacer in them to bring them back to the same as standard.
Ones my springs are on I'll take a few measurements and see how much wider I can go and then might phone the place you got yours from.
Cheers
 
Hi Jolly,
How are you getting on with the Eibachs? Looking at it myself, just don’t want to spoil the ride by making it too hard…. Also, have you managed to avoid tyre rub ok?
 
TonyC2.5si said:
Hi Jolly,
How are you getting on with the Eibachs? Looking at it myself, just don’t want to spoil the ride by making it too hard…. Also, have you managed to avoid tyre rub ok?
Ride seems fine, not too much different to the originals and no tyre rub :thumbsup:
I'm now in the process of getting some Bilstein B8 dampers, I have the fronts but not on the car yet as rears are on back order and not available until April.
 
Wow! Sounds awesome! I’ve got my spacers sorted now, I need to get brave next and go for the eibach pro spring kit! Quite a few people seem to say ‘don’t’ because you’ll spoil it - but that certainly doesn’t seem to be your experience! - and it certainly looks way better than stock! 👍
 
Back
Top Bottom