wheel spacers for 108s

R

roofer84

Member
 Lancashire
Just bought some 108s for my Z4 SE, looking at putting spacers on to fill out the arches wondering what width i would need. looking at bimecc spacers maybe 12mm front 20mm rear or would that be to much with the wheels being staggered, any advice would be welcome.
 
If you are on std tyre sizes, then 20mm rear and 15mm fronts will fit fine, without fouling, even on M Sport suspension.

Mike
 
Ducklakeview said:
If you are on std tyre sizes, then 20mm rear and 15mm fronts will fit fine, without fouling, even on M Sport suspension.

Mike

Thanks Mike 225 40 18 front 255 25 18 rear I will be coming to see you when the schools finish for summer. My roof is working fine but I want the motor moved to the boot before anything does go wrong.
Click to expand...
 
roofer84 said:
Ducklakeview said:
If you are on std tyre sizes, then 20mm rear and 15mm fronts will fit fine, without fouling, even on M Sport suspension.

Mike

Thanks Mike 225 40 18 front 255 25 18 rear I will be coming to see you when the schools finish for summer. My roof is working fine but I want the motor moved to the boot before anything does go wrong.
Click to expand...

Yup, they are standard sizes for a staggered setup, presuming you mean 255/35 on the rears?

Mike
Click to expand...
 
Ducklakeview said:
roofer84 said:
Ducklakeview said:
If you are on std tyre sizes, then 20mm rear and 15mm fronts will fit fine, without fouling, even on M Sport suspension.

Mike

Thanks Mike 225 40 18 front 255 25 18 rear I will be coming to see you when the schools finish for summer. My roof is working fine but I want the motor moved to the boot before anything does go wrong.
Click to expand...

Yup, they are standard sizes for a staggered setup, presuming you mean 255/35 on the rears?

Mike

Yes sorry 255 35 18
Click to expand...
Click to expand...
 
Hi All
Is the info correct below

Specification:
PCD Fitment: 5x120
Bore: 72.6mm
Width: 20mm Per Spacer (40mm Total)
Material: Aluminium
Bolts: 12x1.5mm Tapered 50mm Thread

Fitment:
Please check the size before you purchase
models Series 1,3,5 and 7 or anything that is 5 stud with this PCD

Package included:
2 Spacers and 10 Extended Bolts.
 
You must log in or register to reply here.
Back
Top Bottom