Wheel size. Apex arc 8

[Rickster93]

Looking at purchasing some
Apex arc 8 but concerned about how wide the rears are.?
I’ve all ready got 4 brand new ps3’s on the car standard size.
Planning to lower on H&R springs soon

Here are the sizes ;

18x8.5 et20
18x10 et20

 

[mr wilks]

Those aren't ideal for the Z4M , the rears would fit but your stock 255 40 rear will not be great on a 10j rim & not sure id want to go more
I recently had Arc 8s on my lowered M roadster
fronts 8.5j et 35 with 235 40 18 tyres
rears 9.5j et 22 with 255 40 18 tyres

 

[Rickster93]

Those aren't ideal for the Z4M , the rears would fit but your stock 255 40 rear will not be great on a 10j rim & not sure id want to go more
I recently had Arc 8s on my lowered M roadster

Stunning. How was the fit. I didn’t think they were a bit over kill tbh
fronts 8.5j et 35 with 235 40 18 tyres
rears 9.5j et 22 with 255 40 18 tyres

 

[mmm-five]

I run a 265/40r18 on a standard 224m rear, and the tyre rubs a rear 6” section of the inside liner away on the near side, and about 2” of the front of the liner on the offside.

But I believe Michelin PSS are quite a ‘wide’ tyre for its 265 width, so a different brand may work fine.

 

[TomK]

Looking at purchasing someApex arc 8 but concerned about how wide the rears are.?

I have an as new set in hyper silver that I could be tempted into selling, drop me a pm if you like.
18" fronts 8.5j et 35
18" rears 9.5j et 22

 

[Rickster93]

Looking at purchasing someApex arc 8 but concerned about how wide the rears are.?

I have an as new set in hyper silver that I could be tempted into selling, drop me a pm if you like.
18" fronts 8.5j et 35
18" rears 9.5j et 22
DSC_2372.JPG

Tried to send you a pm mate

 

[Yeddheng]

I’ve got Apex Arc-8 in combo with Eibachs without any issues on my Z4M.

Dimensions:
Wheels:
Front: 18x8,5 Et 38
Rear: 18x10 Et 25
Tyres:
Michelin Cup 2 (a very meaty tyre in comparison w std!)
Front: 235x40 ZR18
Rear: 265x35 ZR18

The rears look really fat and sits flush with -2,15 camber. 8)
The fronts sit 10 mm in from flush with -1,45 camber.

 

[bradz]

I see no issue.

I run 265x35 18" all round on a ARC-8 9.5 et 35 easily get a 10" on the rear.

 

[mr wilks]

I see no issue.

I run 265x35 18" all round on a ARC-8 9.5 et 35 easily get a 10" on the rear.

Op is considering
18x8.5 et20
18x10 et20