Wheel alignment settings

[maupineda]

0 toe front and rear makes the car a bit too busy, I'd do 0 toe rear, and keep the OE setting front with some camber, on the M just add the washer + bolt TMS solution for some more, plus the pin removal. But I think -1.5 is more than find for fast road.

 

[DaveP]

Called up a local garage who specalise in alignment, and was told by the "BMW expert" who will be setting up my car that there's no camber adjustment possible on the front. Is that true?

 

[plenty]

Has been covered many times on this forum and elsewhere. Remove the pin in the top mount to add camber.

 

[Argenta]

The 3 holes in the strut towers are not round, they allow up to -1,5deg camber with std suspension.

 

[PDJ]

Z4M cars you add a washer to change the camber

Washer between the hub and the foot of the shock

 

[Argenta]

Z4M cars you add a washer to change the camber

Washer between the hub and the foot of the shock

IMG_2655.jpeg

...Yes you can, if you need more than -1,5deg (or -2deg with KW)