What's this then?

F

flybobbie

Elite
 Stourbridge
So i'm putting the trim back on after new windshield and this floating around under the mirror;
mist detector.jpg
Is no one capable of doing a job right, this should be stuck to windshield.
Still never use auto so won't miss it really.
 
He had a new windscreen fitted and the fitters couldnt have done the job properly by not reattaching the sensor to the inside of the screen
 
flybobbie said:
So i'm putting the trim back on after new windshield and this floating around under the mirror;
mist detector.jpg
Is no one capable of doing a job right, this should be stuck to windshield.
Still never use auto so won't miss it really.
Click to expand...

I guess that was the sensor that was changed with my replacement screen…. £105 at BMW prices! https://z4-forum.com/forum/posting.php?mode=quote&f=22&p=1826906
 
Well, i will try to stick it on with some glue or double sided tape.
I realise i set my air con to auto, so do use it, but not noticed it working.
 
A thin double sided sticky pad is what you need, don't bother with double sided tape as it'll keep falling off.
You can't buy the OE pad on its own only the sensor with a pad attached, I think this is because it is possible that the sensor can be damaged easily when being removed from the screen.
 
Well i tried double sided tape, it fell off. So stuck it back on long enough to get the trim back on.
Out of sight out of mind.
Autoglaze asked me for a review, i told them about this and the glass being a bit short along the pillars at bottom.
 
You must log in or register to reply here.
Back
Top Bottom