What faults should I know about

RFFMS

New member
 North Yorkshire
I have Just purchased a 2012 Z4 20i . I would really appreciate your input on any faults I should be on the lookout for.

Any common issues with electrics, mechanical faults or interior deterioration I need to be aware of?

any input would be greatly appreciated as I would like to get ahead of any issues before the pop up.

thank you
 
Last edited:
Didn't realise it was an E89 my comments are for E85 2.0l can suffer from cracked exhaust manifolds, had it with mine, replaced with a good used one. The manifold has the catalytic convertors built into it. If you have to replace it the exhaust downpipe joint is an awful job to undo, the nuts on the studs rust away and are one of the worst jobs to do on the car. Getting the studs out requires cutting slots in the exhaust flange to release the pressure on the studs in order to drift them out. I replaced mine with stainless nuts and bolts. Other problems to look out for are oil leaks from the cam cover gasket and the oil filter housing to engine block gasket. Like all BMW's airbag modules do fail and can be replaced with used modules but need coding to the car. You need a decent code reader so invest in one, I use a Creator 310+ scanner but also have all the software for use on a Laptop as well.
 
Last edited:
2.0l can suffer from cracked exhaust manifolds, had it with mine, replaced with a good used one. The manifold has the catalytic convertors built into it. If you have to replace it the exhaust downpipe joint is an awful job to undo, the nuts on the studs rust away and are one of the worst jobs to do on the car. Getting the studs out requires cutting slots in the exhaust flange to release the pressure on the studs in order to drift them out. I replaced mine with stainless nuts and bolts. Other problems to look out for are oil leaks from the cam cover gasket and the oil filter housing to engine block gasket. Like all BMW's airbag modules do fail and can be replaced with used modules but need coding to the car. You need a decent code reader so invest in one, I use a Creator 310+ scanner but also have all the software for use on a Laptop as well.
His an E89
 
I have Just purchased a 2012 Z4 20i . I would really appreciate your input on any faults I should be on the lookout for.

Any common issues with electrics, mechanical faults or interior deterioration I need to be aware of?

any input would be greatly appreciated as I would like to get ahead of any issues before the pop up.

thank you
Read up on the preventative maintenance for your roof.

It’s not a case of if but when things will fail and you get the bong of doom

Get ahead of the curve
 
This might be worth a read on potential roof issues, and how to avoid them.


IIRC I'm sure I have read that the cam-chain tensioner can be a problem on the N20 until some time in 2014 when a revised part was fitted.

Anyway welcome to the forum. :thumbsup:
 
Back
Top Bottom